NEMIX RAM
NEMIX RAM 32GB DDR4 2133 PC4-17000 CL15 2Rx4 1.2V 288-PIN ECC RDIMM Synology memory upgrade
A 32 GB DDR4-2133 ECC registered module with CL15 timing and 1.2 V operation, validated for Synology NAS systems
- Capacity32GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB capacity expands NAS workload headroom
- DDR4 2133 speed matches Synology system specs
- ECC registered design protects data integrity
- 20V operation reduces server power draw
- Major OEM chips ensure enterprise-grade reliability
32 GB DDR4 ECC RDIMM for Synology NAS
This 32 GB DDR4 2133 MHz module is built for Synology RackStation and FlashStation systems that require registered ECC memory. It delivers 32 GB of capacity in a single 288-pin RDIMM running at 1.2 V with CL15 latency. The module uses major-brand DRAM chips and is validated for compatibility with the listed Synology platforms.
Suits Synology NAS upgrades needing registered ECC
Administrators expanding a compatible Synology NAS with a single 32 GB registered DIMM will find the correct form factor, voltage and error-correction here. Systems that accept only unbuffered UDIMMs, SODIMM slots, or non-ECC memory cannot use this module. Buyers needing lower capacities or different speeds should verify their platform requirements first.
Registered ECC RDIMM architecture decides
The module is a 2Rx4 registered DIMM with on-board ECC, a combination required by the target Synology servers. If the NAS motherboard expects unbuffered memory or a different rank configuration, the system will not post. Confirm the platform specifically calls for DDR4 2133 registered ECC RDIMMs before purchasing.
Pontos fortes
- 32GB capacity expands NAS workload headroom
- DDR4 2133 speed matches Synology system specs
- ECC registered design protects data integrity
- 20V operation reduces server power draw
- Major OEM chips ensure enterprise-grade reliability
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2133MHZ ECC LRDIMM Load Reduced Server Memory |
| Part Number | MR17000-324K1 |
| Capacity | 32GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2133MHZ PC4-17000 2Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory |
Perguntas sobre este artigo
Does my Synology NAS need 288-pin DDR4 slots to accept this 32GB ECC RDIMM?
Yes, the module uses a 288-pin DDR4 RDIMM form factor and requires a matching registered DIMM slot on the Synology system.
Can I keep my existing DDR3 SODIMM modules installed while adding this 2133MHz DDR4 RDIMM?
No, the 204-pin DDR3 SODIMM and 288-pin DDR4 RDIMM are physically and electrically incompatible; they cannot share a memory channel.
How do I confirm the 32GB module is running at CL15 1.20V after installation?
Check the Synology DSM Resource Monitor or BIOS memory information screen; it will report 32GB capacity, 2133MHz speed, CL15 latency and 1.20V operation.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



