Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 RDIMM modules with black chips, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5-6400 CL52 2Rx4 1.1V ECC Registered RDIMM 288-pin Kit for Supermicro X14SRA-T

SKU CH-P5YR-98NEF

384 GB DDR5-6400 ECC registered RDIMM kit with four 96 GB modules at CL52 and 1.1 V, validated for the Supermicro X14SRA-T motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Ver as outras 4 configurações
  • 384 GB total capacity from four 96 GB modules
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM prevents data corruption under load
  • 2Rx4 dual-rank design fully populates all slots
  • Exact match for Supermicro X14SRA-T motherboard

384GB DDR5-6400 ECC RDIMM Kit

This 384GB kit contains four 96GB DDR5-6400 registered ECC RDIMMs built for the Supermicro X14SRA-T motherboard. Each module runs at 1.1V with CL52 latency and a 2Rx4 rank structure. The registered design buffers address and command signals so the memory controller stays stable when all slots are populated. It targets administrators who need maximum supported capacity on this specific platform.

Upgrading from lower-capacity DDR5 RDIMMs

If the board currently runs smaller registered DIMMs at the same 6400 MT/s speed and 1.1V voltage, this kit replaces them to reach the full 384GB limit in a matched set. The jump is worthwhile when workloads such as virtualisation, in-memory databases or large dataset processing exceed the existing memory ceiling. It does not apply to systems using unbuffered UDIMMs or a different DDR generation.

Check motherboard manual for population rules

Before ordering, confirm the X14SRA-T supports 96GB dual-rank modules in all four slots and note the required installation sequence. Verify the BIOS version listed in the manual for full capacity recognition. Ensure the platform uses 288-pin DDR5 RDIMM sockets and that no UDIMM or SODIMM variants are installed. Power and cooling headroom for fully populated registered memory should also be reviewed.

Pontos fortes

  • 384 GB total capacity from four 96 GB modules
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • Registered ECC RDIMM prevents data corruption under load
  • 2Rx4 dual-rank design fully populates all slots
  • Exact match for Supermicro X14SRA-T motherboard

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will these 288-pin DDR5 RDIMMs fit the Supermicro X14SRA-T motherboard?

Yes, the kit is built as an exact-match upgrade for the Supermicro X14SRA-T. The 288-pin registered form factor matches the board's DDR5 RDIMM slots, and the 2Rx4 rank, 1.1V voltage and CL52 timing meet the controller's expectations for full-capacity recognition.

What is the correct installation order for the four 96GB modules on the X14SRA-T?

Install the modules in the sequence specified in the Supermicro X14SRA-T manual for a four-DIMM population. The board's population rules dictate which slots must be filled first; skipping this step can prevent the system from booting or from seeing the full 384GB.

Do the modules require any ongoing maintenance such as firmware updates or thermal-pad replacement?

No. The RDIMMs have no heat spreaders and no user-serviceable firmware. ECC error correction runs automatically in hardware, and the registered architecture handles signal integrity without intervention. The only future action would be replacing a module if a hardware fault develops.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.