Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 512GB (16x32GB) DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-KY3K-2M7J9

A 512 GB kit of sixteen 32 GB DDR5 registered ECC RDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro H14DSG-OM motherboard

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 16X32GB

Ver as outras 30 configurações
  • 512 GB total capacity from 16 matched 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation at 2Rx8 rank matches motherboard memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM compatibility

512GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OM

This 512GB kit contains 16 modules of 32GB each, built as 288-pin DDR5 Registered DIMMs with ECC. It is designed for the Supermicro H14DSG-OM motherboard, matching the board's required RDIMM form factor and memory population rules. The modules run at DDR5-5600 (PC5-44800) with a CAS latency of CL46 at 1.1V. This configuration targets servers needing maximum registered ECC capacity in every slot.

Registered architecture and 1.1V operation

The registered (buffered) design reduces electrical load on the memory controller, allowing all 16 slots to run fully populated at the rated DDR5-5600 speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Operating at 1.1V, the modules draw minimal power for their density. No heat spreaders are fitted, so airflow across the DIMMs follows the chassis cooling design.

Replaces partial or mismatched DDR5 populations

This kit replaces incomplete or mixed-capacity DDR5 RDIMM sets that limit total memory or force the controller to downclock. The jump is worth it when the workload demands the full 512GB at native 5600MT/s with 2Rx8 rank structure and CL46 timing. It is not for systems that require UDIMM or SODIMM form factors, nor for boards that do not support 16 registered DIMMs at this voltage and speed.

Pontos fortes

  • 512 GB total capacity from 16 matched 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation at 2Rx8 rank matches motherboard memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM compatibility

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 16X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 16 DDR5 RDIMMs in the Supermicro H14DSG-OM and which population step is most often missed?

Follow the motherboard manual for the exact slot order; the common mistake is skipping the prescribed sequence when filling all 16 slots, which prevents the kit from running at 5600MHz.

What maintenance or replacement will the 512GB ECC RDIMM kit need over its service life?

No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a platform upgrade.

What limit appears first when the 16x32GB registered DDR5 kit runs sustained workloads?

The memory controller's maximum supported capacity and rank-per-channel limit is reached before thermal or voltage constraints become an issue.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.