Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green circuit boards with black memory chips and gold edge connectors lying flat

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM SuperMicro MBD-C9Z790-CGW memory upgrade

SKU CH-JNN2-3ZVJ5

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V 288-pin UDIMM modules validated for SuperMicro MBD-C9Z790-CGW workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 4X16GB

  • 64 GB kit expands workstation capacity
  • DDR5 5600 speed accelerates data throughput
  • CL46 latency sharpens response times
  • 10 V operation reduces power draw
  • Validated for SuperMicro MBD-C9Z790-CGW compatibility

64 GB DDR5 kit for Supermicro MBD-C9Z790-CGW

This 64 GB kit contains four 16 GB DDR5 5600 UDIMM modules built for the Supermicro MBD-C9Z790-CGW motherboard. The memory runs at 1.1 V with CL46 latency and uses a 288 pin unbuffered non ECC design. It is aimed at professionals who need a validated capacity increase for this specific workstation platform.

Suited for MBD-C9Z790-CGW upgrades only

The kit matches the board's DDR5 5600 specification and 1Rx8 rank layout so it installs without configuration changes. Builders using a different motherboard chipset or requiring ECC registered modules should look elsewhere because this memory is not validated for those platforms.

DDR5 5600 CL46 at 1.1 V decides fit

The single specification that determines compatibility is the DDR5 5600 CL46 1.1 V UDIMM profile. If the target system demands a different speed voltage or latency the modules will not operate as intended.

Pontos fortes

  • 64 GB kit expands workstation capacity
  • DDR5 5600 speed accelerates data throughput
  • CL46 latency sharpens response times
  • 10 V operation reduces power draw
  • Validated for SuperMicro MBD-C9Z790-CGW compatibility

Especificações

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I pick the 64GB kit or look for a different capacity?

This kit provides 64GB total as four 16GB modules, matching the board's four DDR5 slots for full population.

What does the 5600 speed rating mean once the memory is installed?

The modules run at DDR5 5600 (PC5 44800) with CL46 latency at 1.10V, delivering the rated throughput when the motherboard enables the standard profile.

Is the 288-pin UDIMM interface the limiting factor for speed or capacity?

The 288-pin DDR5 UDIMM form factor supports this 5600 CL46 kit; the board's memory controller and BIOS determine the maximum stable frequency.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.