NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5-6400 CL52 1.1V ECC Registered RDIMM Supermicro H14DST-FL
64 GB DDR5-6400 ECC registered RDIMM kit (four 16 GB modules, CL52, 1.1 V) validated for the Supermicro H14DST-FL motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit runs at rated speed on Supermicro H14DST-FL
- 1Rx8 registered ECC offloads controller for full 64 GB capacity
- ECC corrects single-bit errors to prevent silent data corruption
- 1 V CL52 timing matches board requirements for stable operation
- 288-pin RDIMM form factor fits the motherboard memory slots
Exact-match DDR5 kit for Supermicro H14DST-FL
This 64 GB kit delivers four 16 GB Registered ECC RDIMMs that match the motherboard's required 288-pin form factor, 1.1 V operation, CL52 timing and DDR5-6400 speed. It is built for administrators who need the precise rank, voltage and timing the server's memory controller expects so the full capacity is recognised at rated speed.
Replaces mismatched or slower modules
Swapping in this kit removes the risk of mixing ranks, voltages or latencies that can force the system to downclock or refuse to boot. The jump is worth it when the board must run fully populated at DDR5-6400 without manual tuning or compatibility guesswork.
Handles full-slot population with ECC integrity
Registered architecture offloads the memory controller so all slots operate at 64 GB total while ECC corrects single-bit errors on the fly. Headroom ends when the workload exceeds the installed 64 GB or demands speeds beyond the rated DDR5-6400 CL52 specification.
Pontos fortes
- Exact-match DDR5-6400 kit runs at rated speed on Supermicro H14DST-FL
- 1Rx8 registered ECC offloads controller for full 64 GB capacity
- ECC corrects single-bit errors to prevent silent data corruption
- 1 V CL52 timing matches board requirements for stable operation
- 288-pin RDIMM form factor fits the motherboard memory slots
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
Will the 288-pin RDIMM modules fit the Supermicro H14DST-FL DIMM slots?
Yes, the kit uses the 288-pin Registered RDIMM form factor that the H14DST-FL requires; UDIMM or SODIMM modules are not compatible.
What is the correct population order when installing all four 16 GB sticks?
Populate the slots in the sequence shown in the Supermicro H14DST-FL manual so the memory controller recognises the full 64 GB at DDR5-6400 CL52.
Do these modules need any active cooling or heat-spreader maintenance over time?
The sticks ship without a heat spreader and run at 1.1 V; ensure case airflow meets the server chassis specification and reseat only if the system reports memory errors.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



