Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1Rx8 1.1V UDIMM Supermicro X14SAE memory upgrade

SKU CH-ET0B-2YVNB

8GB DDR5-5600 CL46 1.1V UDIMM built with major OEM chips for Supermicro X14SAE motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • Exact DDR5-5600 CL46 match for Supermicro X14SAE
  • 1 V unbuffered UDIMM recognised at full rated speed
  • Major OEM Samsung, Micron or Hynix chips tested for stability
  • 288-pin 1Rx8 form factor fits board population rules
  • Lifetime replacement warranty with free US technical support

System-specific DDR5 UDIMM for Supermicro X14SAE

This 8GB DDR5 5600MHz module is built for the Supermicro X14SAE motherboard. It uses the exact 288-pin unbuffered non-ECC layout that board requires. Major OEM chips from Samsung Micron or Hynix are tested at the rated speed timing and voltage. The module installs as a direct drop-in upgrade.

Ideal for owners of that exact board needing

Buyers with any other motherboard or with a system that demands ECC or registered memory should not use this module. It will not fit boards that only accept SODIMM or older DDR generations. Systems requiring multi-rank population rules beyond 1Rx8 should look elsewhere.

The 1Rx8 rank and 1.1V voltage match the memory

These two specifications decide whether the board recognises the full capacity and runs at 5600MHz. If your manual calls for a different rank organisation or voltage this stick will not work correctly.

Pontos fortes

  • Exact DDR5-5600 CL46 match for Supermicro X14SAE
  • 1 V unbuffered UDIMM recognised at full rated speed
  • Major OEM Samsung, Micron or Hynix chips tested for stability
  • 288-pin 1Rx8 form factor fits board population rules
  • Lifetime replacement warranty with free US technical support

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will this 8GB DDR5 5600MHz CL46 1Rx8 UDIMM work alongside my existing DDR5 modules in the Supermicro X14SAE?

The module is spec-matched to the X14SAE's memory-population rules at 5600MHz, 1.1V, CL46 and 1Rx8; matching speed, voltage, latency and rank gives the best chance of stable dual-channel operation.

How can I verify the RAM is running at 5600MHz CL46 after installing it in the Supermicro X14SAE?

Enter the BIOS or use a tool like CPU-Z to confirm the memory frequency reads 5600MHz (PC5-44800) and the CAS latency shows CL46 at 1.1V.

Does the package contain only the 8GB UDIMM or are extra items included?

The package content lists the 8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-pin Non-ECC UDIMM kit; no heat spreader, cables or tools are mentioned.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.