Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 96GB (6×16GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-YR42-A11JB

A 96 GB kit of six 16 GB DDR5 5600 CL46 1.1 V ECC registered RDIMMs built for the Supermicro H14SSF motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Ver as outras 24 configurações
  • Exact-match 96 GB kit installs at full rated DDR5-5600 speed
  • Registered ECC RDIMM prevents silent data corruption under load
  • 1Rx8 1.10 V CL46 modules match server memory controller specs
  • 288-pin form factor fits Supermicro H14SSF DIMM slots precisely
  • Six 16 GB sticks populate every channel for maximum capacity

96GB DDR5-5600 ECC RDIMM kit

This 96GB kit contains six 16GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H14SSF motherboard. Each module runs at 1.1V with CL46 latency and a 1Rx8 organisation. The 288-pin Registered form factor matches the board's memory-population rules exactly.

Suited for servers needing maximum capacity

Ideal for administrators expanding a Supermicro H14SSF to its full 96GB limit with validated Registered ECC modules. Not suitable for systems that require UDIMM or SODIMM form factors, or for platforms that do not support Registered memory architecture.

Registered ECC architecture

The Registered (buffered) design offloads the memory controller so all six slots operate at rated speed while ECC corrects single-bit errors automatically. This specification determines whether the kit will be recognised and stable in the target server.

Pontos fortes

  • Exact-match 96 GB kit installs at full rated DDR5-5600 speed
  • Registered ECC RDIMM prevents silent data corruption under load
  • 1Rx8 1.10 V CL46 modules match server memory controller specs
  • 288-pin form factor fits Supermicro H14SSF DIMM slots precisely
  • Six 16 GB sticks populate every channel for maximum capacity

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the Supermicro H14SSF motherboard need to support 288-pin DDR5 RDIMMs for this kit to function?

Yes, this kit uses the 288-pin DDR5 RDIMM form factor, which the H14SSF requires; it will not fit UDIMM or SODIMM slots.

Can I mix these 1Rx8 CL46 1.1V modules with other DDR5 RDIMMs of different rank or latency in the same H14SSF?

Mixing ranks, latencies, or voltages is not recommended; the board's memory controller expects identical modules to run all six slots at the rated 5600 speed.

How can I confirm the kit is running at DDR5-5600 CL46 1.1V after installation?

Check the BIOS memory information or use a tool like dmidecode to verify speed, CAS latency, voltage, and that all 96GB are detected.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.