NEMIX RAM
NEMIX RAM 96GB DDR5 5600 CL46 ECC RDIMM memory upgrade
A 96 GB DDR5 5600 registered ECC module with CL46 latency and 1.1 V operation for compatible Dell servers
- Capacity96GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB capacity supports large-scale virtualisation and in-memory databases
- DDR5 5600 MT/s bandwidth accelerates data-intensive server workloads
- ECC registered design detects and corrects single-bit errors for uptime
- 1 V operation reduces power draw in dense rack deployments
- Dell-validated 288-pin RDIMM ensures drop-in compatibility with SNPFFX9NC/96G
96GB DDR5 5600 ECC RDIMM for Dell Servers
This 96GB registered DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It targets IT professionals upgrading Dell servers or workstations that require ECC registered memory for data integrity. The single 2Rx4 stick uses major OEM chips from Samsung, Micron or Hynix and carries part number MR44800-9624K1.
Verify Dell model and slot population rules
Confirm your specific Dell server or workstation supports 96GB DDR5 5600 RDIMM modules before ordering. Check the system manual for maximum capacity per slot and approved population configurations. Registered ECC memory must match the platform's registered memory requirement; unbuffered or non-ECC modules will not function. Ensure the motherboard accepts 288-pin DDR5 RDIMM form factor and 1.1V operating voltage.
No heat spreader means direct airflow contact
The module ships without a heat spreader, so it relies on chassis airflow for cooling. The 288-pin DDR5 RDIMM edge connector seats in standard server DIMM slots with a single keying notch. Registered buffering adds a clock cycle, which the memory controller expects. Handle by the PCB edges to avoid contaminating the gold contacts during installation.
Pontos fortes
- 96 GB capacity supports large-scale virtualisation and in-memory databases
- DDR5 5600 MT/s bandwidth accelerates data-intensive server workloads
- ECC registered design detects and corrects single-bit errors for uptime
- 1 V operation reduces power draw in dense rack deployments
- Dell-validated 288-pin RDIMM ensures drop-in compatibility with SNPFFX9NC/96G
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 5600MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K1 |
| Capacity | 96GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 96GB (1X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
Perguntas sobre este artigo
What is included in the box and do I need any extra components to install this memory?
The box contains one 96GB DDR5 5600 CL46 ECC RDIMM module; no additional parts are required for installation in a compatible Dell server or workstation.
How do I decide between the different capacities or versions listed for this Dell-compatible DDR5 RDIMM?
This specific listing is a single 96GB 2Rx4 registered DIMM running at 5600 MT/s with CL46 latency; choose it when your system needs a single high-density registered ECC module of that exact specification.
What does the 5600 MT/s rating actually deliver once the module is installed in a Dell server?
The module operates at DDR5 5600 (PC5-44800) with a CAS latency of 46 at 1.1 V, providing registered ECC bandwidth and error correction for the supported Dell platform.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



