Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 384GB 4x96GB 5600MHz CL46 ECC Registered RDIMM memory upgrade

SKU CH-N84Q-VK6PP

A 384 GB DDR5 registered ECC kit built for the Supermicro H13SSL-NT motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Ver as outras 24 configurações
  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation matches the motherboard's voltage requirement for stable full-population runs
  • Verified fit for the Supermicro H13SSL-NT using 288-pin RDIMM form factor

Exact-match 384 GB kit for Supermicro H13SSL-NT

This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. Registered ECC modules populate every slot at the rated 5600 MT/s without manual tuning. The 288-pin form factor matches the board's DIMM sockets precisely.

Sustained-load stability with registered ECC

Registered architecture buffers each command so the memory controller remains stable when all four slots run fully populated at 5600 MT/s. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during continuous workloads. The 1.1 V operating voltage keeps power draw consistent across extended runs.

No heat spreader, standard 288-pin RDIMM fit

Modules ship without a heat spreader, relying on chassis airflow for cooling in dense server configurations. The 288-pin RDIMM keying ensures correct orientation and prevents insertion into UDIMM or SODIMM slots. Builders must follow the motherboard manual for supported capacities and approved population order before installation.

Pontos fortes

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation matches the motherboard's voltage requirement for stable full-population runs
  • Verified fit for the Supermicro H13SSL-NT using 288-pin RDIMM form factor

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How much power does the 1.10V DDR5 kit draw when the server runs 24/7?

Each module operates at 1.10V, the standard DDR5 voltage, so total draw depends on your CPU and motherboard power management rather than the memory alone.

What motherboard slot and population rules are required for the 4x96GB RDIMM kit?

The kit needs a Supermicro H13SSL-NT motherboard with 288-pin RDIMM slots; consult the board manual for the exact DIMM population order before installing all four modules.

Can I keep my existing DDR5 RDIMMs and add this 384GB kit to the same server?

Mixing different capacities, ranks or speeds is not recommended; the board's memory controller expects identical 2Rx4 CL46 modules in every populated slot for stable operation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.