Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 2x96GB CL46 ECC RDIMM memory upgrade

SKU CH-4BYH-CPXVX

192 GB DDR5-5600 ECC registered RDIMM kit (2 × 96 GB, CL46, 1.1 V) validated for the Gigabyte MZ33-AR1 server motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Ver as outras 24 configurações
  • 192 GB total capacity from two 96 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated server performance
  • Registered ECC architecture corrects single-bit errors for data integrity
  • 1 V operation at 2Rx4 rank matches motherboard memory controller expectations
  • 288-pin RDIMM form factor verified compatible with GIGABYTE MZ33-AR1

192GB DDR5 5600 ECC RDIMM kit

This 192GB kit contains two 96GB DDR5 5600 Registered ECC RDIMMs built for the GIGABYTE MZ33-AR1 motherboard. Each module runs at 1.1V with CL46 timing and a 2Rx4 rank layout that matches the board's memory controller expectations. It targets server and workstation builders who need maximum registered capacity in a two-slot configuration.

DDR5 5600 RDIMM limits

DDR5 5600 (PC5-44800) sets the maximum data rate the modules can reach when the platform supports it. Registered DIMMs add a clock cycle of buffering so the memory controller can drive every slot at full population, but the board's own population rules still decide how many ranks per channel are allowed. ECC corrects single-bit errors on the fly yet cannot fix multi-bit failures.

Verify MZ33-AR1 memory rules

Check the GIGABYTE MZ33-AR1 manual for the approved DIMM population order, maximum supported capacity per slot, and any BIOS version required for 96GB RDIMMs. Confirm the board accepts 2Rx4 Registered ECC modules at DDR5 5600 before ordering. Ensure the 288-pin RDIMM form factor matches the installed slots — UDIMM or SODIMM variants will not fit.

Pontos fortes

  • 192 GB total capacity from two 96 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated server performance
  • Registered ECC architecture corrects single-bit errors for data integrity
  • 1 V operation at 2Rx4 rank matches motherboard memory controller expectations
  • 288-pin RDIMM form factor verified compatible with GIGABYTE MZ33-AR1

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I choose the 192GB 2x96GB kit or a different capacity for my GIGABYTE MZ33-AR1?

This kit provides exactly 192GB as two 96GB modules, matching the board's DDR5 5600 registered ECC requirement and populating two slots at the rated speed.

What does the DDR5 5600 speed mean once installed in the MZ33-AR1?

The modules will run at 5600 MT/s with CL46 latency at 1.1V, delivering the full PC5-44800 bandwidth the motherboard's memory controller expects when fully populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the memory controller so both DIMMs operate at 5600 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.