Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 512GB 16x32GB Supermicro H14DSG-OD

SKU CH-NQVK-KQ8YV

A 512 GB DDR5 5600 ECC RDIMM kit of sixteen 32 GB modules at CL46 and 1.1 V, registered 2Rx8 for full-capacity stability on Supermicro H14DSG-OD

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 16X32GB

Ver as outras 30 configurações
  • 512 GB total capacity from sixteen 32 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the board's required slot type and population rules

512GB DDR5-5600 ECC RDIMM kit for Supermicro

This 512GB kit contains sixteen 32GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OD memory controller expects. The 2Rx8 organisation, 1.1V operation and CL46 latency let every slot run fully populated at the rated 5600 MT/s without down-clocking.

Who this suits and who should look elsewhere

IT teams upgrading or repairing a Supermicro H14DSG-OD server that requires registered DDR5 ECC RDIMMs in a full 16-DIMM configuration. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a smaller total capacity should choose a different kit.

The spec that decides fit

The motherboard demands 288-pin DDR5 registered ECC RDIMMs with 2Rx8 organisation at 1.1V; this kit matches those requirements exactly so the system recognises the full 512GB at DDR5-5600 speed.

Pontos fortes

  • 512 GB total capacity from sixteen 32 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the board's required slot type and population rules

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 16X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What motherboard must I already have for this 16 x 32 GB kit to be recognised at full 512 GB capacity?

The kit is validated for the Supermicro H14DSG-OD motherboard; its 288-pin RDIMM slots and memory-population rules accept the exact rank, voltage and timing of these modules.

Can I mix these CL46 2Rx8 RDIMMs with slower DDR5 modules already installed in the same H14DSG-OD board?

Mixing ranks, latencies or speeds is not recommended; the board will down-clock all channels to the slowest DIMM and population rules may prevent full 512 GB operation.

How do I confirm the kit is running at DDR5 5600 with ECC active after installation?

Enter BIOS or use a hardware-inventory tool — it should report 5600 MT/s, CL46, 1.1 V, registered ECC and 512 GB total across all 16 slots.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.