SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00498937BTC
Em stock
NEMIX RAM
NEMIX RAM DDR5 6400 96GB (2x48GB) CL52 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade
96 GB DDR5-6400 ECC registered dual-rank kit tuned for Supermicro H14DST-F servers
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB total capacity from two 48 GB modules for high-density server workloads
- DDR5 6400 speed rated at PC5-51200 for maximum supported throughput
- CL52 latency and 1.1 V operation match the motherboard's exact timing requirements
- Registered ECC RDIMM design corrects single-bit errors and buffers signals for full-slot stability
- 288-pin 2Rx8 form factor verified compatible with Supermicro H14DST-F memory population rules
Exact DDR5-6400 kit for Supermicro H14DST-F
This 96 GB kit consists of two 48 GB DDR5-6400 RDIMMs rated at 1.1 V with CL52 latency. The 2Rx8 registered ECC modules match the 288-pin form factor and electrical requirements the H14DST-F memory controller expects, so the system recognises the full capacity at rated speed.
For servers needing maximum registered ECC capacity
The kit suits administrators populating every slot on an H14DST-F with registered ECC memory. Builders who need unbuffered UDIMMs, SODIMMs, lower voltages, or non-ECC modules should look elsewhere, as those types will not function in this motherboard.
Ready-to-install matched pair
The two modules are packaged as a single kit with identical rank, timing and voltage characteristics, removing the guesswork of mixing separate sticks. No heat spreaders, cables, software licences or additional accessories are included.
Pontos fortes
- 96 GB total capacity from two 48 GB modules for high-density server workloads
- DDR5 6400 speed rated at PC5-51200 for maximum supported throughput
- CL52 latency and 1.1 V operation match the motherboard's exact timing requirements
- Registered ECC RDIMM design corrects single-bit errors and buffers signals for full-slot stability
- 288-pin 2Rx8 form factor verified compatible with Supermicro H14DST-F memory population rules
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
Will this 288-pin RDIMM kit work with my Supermicro H14DST-F motherboard?
This kit is verified for the Supermicro H14DST-F and matches the board's required 288-pin Registered DDR5 form factor, 1.10V voltage, and 2Rx8 rank layout so the memory controller recognises all 96GB at DDR5-6400 CL52.
Can I mix these 48GB modules with smaller DDR5 RDIMMs already installed?
Mixing different capacities or ranks can prevent the server from booting or force reduced speeds; consult the H14DST-F manual for approved population rules before adding this 2x48GB kit alongside existing DIMMs.
How do I confirm the system is running the full 96GB at 6400 MT/s with ECC active?
Enter BIOS or use a tool like dmidecode to verify each slot shows 48GB DDR5-6400 CL52 1.10V Registered ECC and that total capacity reports 96GB with ECC enabled.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.0009545BTC
Em stock