SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00495018BTC
Em stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 1.5TB 12x128GB Kit Supermicro H14SHM
A 1.5 TB DDR5-6400 registered ECC kit of twelve 128 GB RDIMMs built for the Supermicro H14SHM motherboard
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5 TB capacity from twelve 128 GB modules lets you maximise Supermicro H14SHM memory slots
- DDR5 6400 speed with CL52 latency runs at rated frequency on the server memory controller
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption under load
- 2Rx4 dual-rank organisation at 1.1 V delivers full population stability across all channels
- 288-pin RDIMM form factor matches the motherboard's required slot type exactly
Supermicro H14SHM 1.5TB DDR5 ECC RDIMM Kit
This 1.5 terabyte memory kit contains twelve 128GB DDR5 6400 Registered ECC RDIMMs built for the Supermicro H14SHM motherboard. It targets administrators who need maximum registered capacity on this specific platform without mixing modules.
288-Pin RDIMM Installation Notes
Each module uses the 288-pin RDIMM form factor required by the H14SHM and runs at 1.1V with CL52 timing. Population order matters on this board; follow the manual's approved slot sequence or the system may not recognise the full 1.5TB.
Suited for Fully Populated H14SHM Builds
The kit suits operators filling every DIMM slot on a compatible Supermicro H14SHM with matched 2Rx4 Registered ECC modules. Buyers needing unbuffered UDIMMs, lower capacities, or memory for a different motherboard should look elsewhere.
Pontos fortes
- 5 TB capacity from twelve 128 GB modules lets you maximise Supermicro H14SHM memory slots
- DDR5 6400 speed with CL52 latency runs at rated frequency on the server memory controller
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption under load
- 2Rx4 dual-rank organisation at 1.1 V delivers full population stability across all channels
- 288-pin RDIMM form factor matches the motherboard's required slot type exactly
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
How do I verify the 1.5TB DDR5 6400 kit is running at CL52 1.1V after installation?
Enter the server BIOS or UEFI and confirm the memory frequency shows 6400 MT/s, CAS latency reads CL52, and voltage reports 1.1V with all 12 modules detected at 128GB each.
What does the 12x128GB kit contain and is anything else required?
The box holds twelve 288-pin DDR5 RDIMM modules; no extra cables, brackets or software are included and nothing else is needed for installation.
Should I choose this 1.5TB 12x128GB DDR5 6400 kit or a different capacity for my Supermicro H14SHM?
Select this 1.5TB kit when your workload needs the maximum supported capacity across all twelve slots; choose a smaller kit only if you require fewer than 12 modules.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
