NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 576GB 12x48GB 6400MHz CL52 1.1V 2Rx8 Supermicro H13DSH
576 GB DDR5 ECC registered kit with twelve 48 GB modules at 6400 MHz CL52, 1.1 V, 2Rx8, validated for Supermicro H13DSH
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity across 12 matched 48 GB modules
- DDR5 6400 MT/s speed with CL52 latency for rated throughput
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- 1 V operation at the voltage the platform expects
- Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
Server Memory Kit for Supermicro H13DSH
This 576GB kit contains twelve 48GB DDR5 RDIMM modules built for the Supermicro H13DSH motherboard. Registered ECC architecture and a 1.1V operating voltage match the board's memory controller requirements for full-capacity operation. System administrators scaling database or virtualization workloads gain the registered buffering needed when every slot is populated.
Registered ECC Changes Data Integrity
Registered buffering reduces electrical load on the memory controller so all twelve slots run at the rated 6400MHz speed without signal degradation. ECC corrects single-bit errors in real time, preventing silent data corruption that can halt production services. The CL52 timing and 2Rx8 organization are the exact parameters the platform expects for stable operation.
Verify Motherboard Population Rules
The Supermicro H13DSH manual defines supported capacities, approved DIMM population order, and installation steps that must be followed before ordering. Registered RDIMM form factor is required; UDIMM or SODIMM modules will not fit the 288-pin slots. Confirm your specific BIOS revision and CPU configuration support the full 576GB capacity.
Pontos fortes
- 576 GB total capacity across 12 matched 48 GB modules
- DDR5 6400 MT/s speed with CL52 latency for rated throughput
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- 1 V operation at the voltage the platform expects
- Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
Will the 12 RDIMM modules need any firmware updates or periodic replacement during their service life?
The modules are a 12 x 48GB DDR5 6400MHz CL52 1.10V 2Rx8 288-pin ECC Registered kit verified for the Supermicro H13DSH; they require no firmware updates and are covered by a lifetime replacement warranty.
What limits sustained throughput when all 12 slots are populated at DDR5-6400?
The registered ECC architecture offloads the memory controller so every slot runs fully populated at the rated 6400MHz speed without down-clocking.
How much heat and power does the 576GB kit generate when running continuously at 1.10V?
Each module operates at 1.10V without a heat spreader; the registered design keeps per-DIMM power low enough for standard server airflow to handle continuous operation.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.001328BTC
Em stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010106BTC
Em stock