Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two black DDR3 DIMMs in a dual-channel kit

OWC

OWC 8GB (2x4GB) DDR3 1333 PC3-10600 CL9 1.5V Non-ECC UDIMM Kit

SKU CH-SA2Q-0ECRJ

Dual-channel 8 GB DDR3 kit running at 1333 MHz CL9 for desktop upgrades

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • Boost system responsiveness with 8 GB dual-channel DDR3 1333 kit
  • JEDEC-standard 1.5 V modules ensure warranty-safe upgrades
  • CL9 latency and 240-pin UDIMM form factor fit standard desktop slots
  • 100 % JEDEC and RoHS compliance guarantees reliable operation
  • Cost-effective DIY upgrade adds multitasking headroom for everyday workloads

OWC 8GB DDR3 1333 Kit

This kit provides two 4GB unbuffered DDR3 modules rated at 1333MHz with CL9 latency. It targets desktop and workstation owners who need a straightforward JEDEC-standard capacity increase for older platforms. The 240-pin DIMMs operate at the standard 1.5V and carry no heat spreaders.

8GB dual-channel capacity

Eight gigabytes split across two ranks per module gives comfortable headroom for everyday multitasking and larger document workloads. The dual-channel layout doubles theoretical bandwidth over a single stick. Systems limited to lower memory ceilings will not use the full kit.

Standard voltage thermals

Running at the JEDEC 1.5V specification keeps power draw and heat output low without active cooling. Bare modules rely on case airflow, so they remain silent in normal operation. The low thermal load suits compact chassis with restricted ventilation.

Pontos fortes

  • Boost system responsiveness with 8 GB dual-channel DDR3 1333 kit
  • JEDEC-standard 1.5 V modules ensure warranty-safe upgrades
  • CL9 latency and 240-pin UDIMM form factor fit standard desktop slots
  • 100 % JEDEC and RoHS compliance guarantees reliable operation
  • Cost-effective DIY upgrade adds multitasking headroom for everyday workloads

Especificações

BrandOWC
Part Number1U3D32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will these two 4 GB DDR3 1333 modules fit my desktop motherboard?

They use the standard 240-pin DDR3 UDIMM form factor and run at 1.5 V, so any desktop board with DDR3 slots that accepts PC3-10600 CL9 memory will take them.

Do I need to populate all four memory slots to use this kit?

No, the kit is a matched dual-channel pair; install the two sticks in the correct colour-coded slots and the board will run in dual-channel mode without extra modules.

Is this memory compatible with a Mac Pro that requires PC3-10600 DDR3?

Yes, the modules meet JEDEC PC3-10600 1333 MHz CL9 at 1.5 V, which matches the specification used in Mac Pro models that take unbuffered non-ECC DDR3 UDIMMs.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.