Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two black 240-pin DDR3L UDIMM sticks in a dual-channel kit

OWC

OWC 8GB (2x4GB) DDR3L 1333 ECC Unbuffered UDIMM Kit

SKU CH-C8R7-DMNCZ

An 8 GB dual-channel DDR3L 1333 kit with ECC unbuffered UDIMMs at 1.35 V for workstations, servers and NAS systems

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • ECC protection guards data integrity in critical workloads
  • 35V DDR3L operation reduces power draw versus standard DDR3
  • Dual-channel 8GB kit (2 x 4GB) doubles memory bandwidth
  • CL9 latency at 1333MHz delivers responsive multitasking
  • 240-pin unbuffered UDIMM fits compatible desktops, workstations and servers

OWC DDR3L 1333 ECC UDIMM Kit

This kit provides 8 GB of DDR3L memory in a matched pair of 4 GB modules. It runs at 1333 MHz with CL9 latency and operates at the reduced 1.35 V DDR3L voltage. The modules are unbuffered ECC UDIMMs on a 240-pin form factor. They are intended for desktop workstations, servers and NAS devices that specifically require ECC memory.

Suits systems needing DDR3L ECC unbuffered memory

This kit suits boards that require DDR3L ECC unbuffered UDIMMs at 1333 MHz. It will not work in systems that only accept non-ECC memory or standard 1.35 V DDR3L without ECC support. Boards requiring registered or fully buffered DIMMs cannot use these modules. Buyers must verify their platform documentation for DDR3L ECC unbuffered compatibility.

1.35 V DDR3L voltage decides fit

The single specification that decides compatibility is the 1.35 V DDR3L operating voltage combined with ECC unbuffered operation. A motherboard or server chassis must explicitly support DDR3L ECC unbuffered UDIMMs at this voltage. If the platform only supports standard voltage DDR3, registered ECC, or non-ECC memory, the modules will not function.

Pontos fortes

  • ECC protection guards data integrity in critical workloads
  • 35V DDR3L operation reduces power draw versus standard DDR3
  • Dual-channel 8GB kit (2 x 4GB) doubles memory bandwidth
  • CL9 latency at 1333MHz delivers responsive multitasking
  • 240-pin unbuffered UDIMM fits compatible desktops, workstations and servers

Especificações

BrandOWC
Part Number1E3T32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will this kit work in a system that only supports standard 1.35V DDR3L?

Yes, these modules run at 1.35V and conform to the DDR3L JEDEC standard, so they are compatible with systems designed for that voltage.

Is this memory suitable for a workstation that requires ECC error correction?

Yes, the kit is ECC unbuffered, providing the error-correcting capability required by many workstation and server platforms.

Does the dual-channel kit require matching pairs in specific slots?

The kit contains two matched 4GB modules; install them in the motherboard's designated dual-channel slots, usually the same-colour DIMM sockets, to enable dual-channel operation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.