Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green 288-pin DDR4 UDIMM module with black chips and no heat spreader

OWC

OWC 8GB DDR4 2666 ECC UDIMM Synology RS2423+ 2E6D41R808GB

SKU CH-2RWT-AXSCD

8GB DDR4 2666 ECC UDIMM module adds reliable memory capacity to Synology RS2423+ and RS2423RP+ systems

  • Capacity8GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 8GB

  • ECC protection guards data integrity on Synology RS2423+
  • 2666 MHz DDR4 speed matches PC4-21300 system bus
  • CL19 latency and 1.2 V voltage keep power draw low
  • 8 GB single-rank module adds capacity without filling extra slots
  • JEDEC and RoHS compliant for warranty-safe NAS upgrades

8GB DDR4 2666 ECC UDIMM for Synology RS2423+

This 8GB DDR4 2666MHz ECC unbuffered UDIMM is built for Synology RackStation RS2423+ and RS2423RP+ NAS units. It adds capacity to systems that support ECC memory for data integrity. The single-rank 1Rx8 module runs at 1.2V with CL19 latency. It suits administrators expanding memory in compatible rack-mounted storage servers.

DDR4 2666 standard limits module speed and voltage

The DDR4 2666 (PC4-21300) JEDEC standard fixes the maximum data rate at 2666 MT/s and the operating voltage at 1.2V. Modules rated for 2133MHz or 2400MHz will down-clock to match the slowest installed DIMM. ECC unbuffered UDIMMs cannot be mixed with registered or load-reduced DIMMs in the same channel. The 288-pin form factor fits only DDR4 slots.

Verify NAS model and free DIMM slots before ordering

Confirm the unit is a Synology RS2423+ or RS2423RP+; other models may not accept this part. Check how many memory slots the chassis provides and whether any are already populated. Ensure the system firmware is current so the new module is recognised at the correct speed. The module has no heat spreader, so airflow around the DIMM area must be adequate.

Pontos fortes

  • ECC protection guards data integrity on Synology RS2423+
  • 2666 MHz DDR4 speed matches PC4-21300 system bus
  • CL19 latency and 1.2 V voltage keep power draw low
  • 8 GB single-rank module adds capacity without filling extra slots
  • JEDEC and RoHS compliant for warranty-safe NAS upgrades

Especificações

BrandOWC
Part Number2E6D41R808GB
Capacity8GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS2423+
Synology RackstationRS2423RP+

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I pick the 8GB module or a larger capacity for my RS2423+?

This listing is for a single 8GB DDR4 2666 ECC UDIMM. If your Synology RS2423+ or RS2423RP+ has empty slots, adding one 8GB stick increases total memory by 8GB.

What does the 2666MHz speed actually deliver inside my NAS?

The module runs at DDR4 2666 (PC4-21300) with CL19 latency at 1.2V. In your RS2423+ it will operate at the system's supported memory frequency, improving multitasking and file-handling responsiveness.

Is the 288-pin DDR4 ECC UDIMM interface compatible with my RackStation?

Yes. The 288-pin DDR4 ECC unbuffered DIMM matches the memory slot specification for Synology RS2423+ and RS2423RP+ units. It is also backward compatible with 2133MHz and 2400MHz operation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.