Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Three white 120mm RGB case fans with infinity mirror lighting and remote control

PANO-MOUNTS

PANO-MOUNTS 120mm RGB Case Fans 3-Pack White

SKU CH-5TGP-9811H

Three white 120 mm RGB case fans with hydraulic bearings, 1200 RPM, 38 CFM airflow and 21 dBA noise, controlled by wireless remote

  • Fan Size120mm
  • LEDRGB
  • TypeCase Fan
  • Bearing TypeHydraulic bearing
  • RPM1200RPM
  • Air Flow38CFM
  • Hundreds of lighting modes with 12 monochrome options and surrounding loop
  • Quiet hydraulic bearing runs at 21dBA with rubber pads
  • 1200RPM delivers 38CFM airflow in 120mm frame
  • Wireless remote controls fan speed and LED brightness
  • 6Pin power connector ensures stable RGB lighting output

Three white 120mm RGB fans for PC builders

This pack supplies three 120mm case fans in a white finish. Each unit uses a hydraulic bearing and runs at 1200RPM to deliver 38CFM of airflow. The 6Pin power connector feeds both the motor and the integrated RGB lighting. They fit standard 120mm mounting points on cases, CPU coolers or radiators.

21dBA noise level with rubber pads

The fans operate at 21dBA under normal load. Rubber pads on the frame corners dampen vibration against the chassis. Power draw stays modest thanks to the 12V 6Pin interface. The hydraulic bearing keeps rotation smooth without the whine sometimes heard from sleeve designs.

Remote control adjusts speed and light

A wireless remote lets you switch the fans on or off, change RPM and dim or brighten the LEDs without opening the case. The lighting engine offers 12 monochrome modes plus a surrounding loop that combines into hundreds of effect variations. No separate fan controller or software is required.

Pontos fortes

  • Hundreds of lighting modes with 12 monochrome options and surrounding loop
  • Quiet hydraulic bearing runs at 21dBA with rubber pads
  • 1200RPM delivers 38CFM airflow in 120mm frame
  • Wireless remote controls fan speed and LED brightness
  • 6Pin power connector ensures stable RGB lighting output

Especificações

Fan Size120mm
LEDRGB
TypeCase Fan
Bearing TypeHydraulic bearing
RPM1200RPM
Air Flow38CFM
Noise Level21dBA
Power Connector6Pin
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness25mm
FeaturesHUNDREDS OF LIGHTING MODES:
Dimensions120×120×25mm 4.72*4.72*0.98in

Perguntas sobre este artigo

How do I mount the 120mm fans and connect the 6-pin power cable so the RGB lighting works?

Screw each 120×120×25mm fan into a standard 120mm case mount using the four corner holes, then plug the 6-pin connector into the matching header on your fan hub or controller; the rubber pads on the corners dampen vibration once the screws are snug.

What part of the hydraulic-bearing fan will wear out first and need replacement?

The hydraulic bearing inside each 1200RPM fan is the component that degrades over time; when noise rises above the rated 21dBA or airflow drops below 38CFM, the fan should be swapped.

At what point does the remote-controlled RGB lighting stop responding during a long gaming session?

The wireless remote controls power, speed and brightness for all three fans; if the remote battery weakens or the 6-pin connection loosens, lighting modes and fan speed adjustments will fail first.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.