Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 120mm square case fan with nine dark blades and rubber mounting washers

Phanteks

Phanteks PH-F120SK_BBK_PWM 120mm case fan 500-1500 RPM 50 CFM 30.3 dB(A)

SKU CH-6Z14-ZE7KF MPN PH-F120SK_BBK_PWM

A 120 mm PWM case fan with a nine-blade design delivering 50 CFM airflow at 30.3 dB(A) and a 500-1500 RPM range, supplied with rubber dampening washers

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeRifle
  • Nine-blade design delivers 50 CFM airflow at 1500 RPM
  • PWM control adjusts speed from 500 to 1500 RPM for optimised curves
  • Rifle bearing with rubber dampeners cuts vibration to 30.3 dB(A)
  • Rigid frame adds structural strength for stable 120 mm operation
  • Includes 8 rubber washers and 4 screws for vibration-free mounting

Phanteks SK120 PWM 120mm case fan

The Phanteks SK120 PWM is a 120mm case fan built for chassis cooling. It suits builders who want a single fan that can run quietly at idle and ramp up when the system load rises. The nine-blade design targets higher airflow than standard blades. Buyers needing a fan controller in the box or addressable RGB lighting should look elsewhere.

4-pin PWM control range 500 to 1500 RPM

Speed is managed through a standard 4-pin PWM header, giving a range of 500 to 1500 RPM with a tolerance of plus five percent and minus ten percent. The motherboard or fan hub defines the curve, so the fan cannot set its own minimum or maximum speeds. At full speed it delivers 50 CFM at 30.3 dB(A). Systems without a PWM header lose automatic speed control.

Rifle bearing and rubber dampeners for vibration

The fan uses a rifle bearing combined with eight included rubber dampening washers to reduce vibration transfer to the case. The rigid frame adds structural stiffness to support the bearing. Installers who prefer traditional sleeve or ball bearings without extra mounting hardware may find the rubber washer step unnecessary.

Pontos fortes

  • Nine-blade design delivers 50 CFM airflow at 1500 RPM
  • PWM control adjusts speed from 500 to 1500 RPM for optimised curves
  • Rifle bearing with rubber dampeners cuts vibration to 30.3 dB(A)
  • Rigid frame adds structural strength for stable 120 mm operation
  • Includes 8 rubber washers and 4 screws for vibration-free mounting

Especificações

BrandPhanteks
SeriesSK PWM Fan 120mm
ModelPH-F120SK_BBK_PWM
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeRifle
RPM500 - 1500 +5% -10% RPM
Air Flow50 CFM
Noise Level30.3 dB(A)
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesNine-blade design offers a higher airflow and quiet cooling solution for the best performance
PWM capabilities built-in to precisely control the speed to achieve optimized fan curve
Rigid frame design and included rubber dampeners helps to prevent vibration
Low-noise operation without sacrificing performance
Dimensions120 x 120 x 25 mm
Package Contents1 x PH-F120SK_BBK_PWM
4 x Fan Screws
8 x Rubber dampening washers
Peso de envio0.17 kg
Dimensões da embalagem173 × 123 × 27 mm

Perguntas sobre este artigo

The SK PWM line comes in 120 mm and 140 mm — which one fits my case?

Check your chassis specifications for 120 mm or 140 mm mounting points; this model is the 120 mm version and includes screws plus rubber dampening washers for either orientation.

What does the 50 CFM airflow rating mean once the fan is installed in a real system?

At full speed the fan moves 50 CFM through an unrestricted path; inside a case the actual flow will be lower depending on filter density, grille restriction and other components in the airflow path.

The fan uses a 4-pin PWM connector — what speed range does that actually allow?

The 4-pin PWM header lets the motherboard vary the fan between 500 and 1500 RPM, so the system can run it quietly at idle and ramp up to maximum airflow under load.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.