Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two silver metal rails with mounting brackets and sliding mechanism, rectangular shape, brushed finish

Qnap

Qnap RAIL-A03-57 80U Rail Kit for TS-x79 / TS-ECx80U Rackmount NAS

SKU CH-SM8A-BPMFV MPN RAIL-A03-57

Rack-mount rail kit supporting compatible QNAP NAS, expansion and surveillance servers with a 125.66 lb load capacity

  • FeaturesRail Kit for TS-x79 / TS-ECx80U Rackmount Models
  • Dimensions2.72" x 28.40" x 3.96"
  • Weight5.80 lbs
  • Secure rack mounting for TS-x79 and TS-ECx80U NAS models
  • Supports up to 125.66 lb load capacity for heavy enclosures
  • Compact 2.72" height fits standard 80U rack spacing
  • Lightweight 5.80 lb steel rails simplify installation
  • Compatible with QNAP NAS, expansion and surveillance servers

Compatible QNAP Rackmount NAS Models

The RAIL-A03-57 rail kit supports TS-x79 and TS-ECx80U series NAS servers, including TS-879U-RP, TS-1279U-RP, and TS-EC1680U-RP units. It also fits SS-EC1879U-SAS-RP and VS-12164U-RP PRO surveillance servers. Installers mount compatible enclosures into standard racks using this hardware.

Load Capacity and Physical Dimensions

The kit handles a maximum load capacity of 125.66 lb for heavy storage arrays. Assembled rails measure 2.72 inches high, 28.40 inches wide, and 3.96 inches deep. The package weighs 5.80 lbs and occupies minimal rack depth during installation.

Included Mounting Hardware

Bundled screws and brackets secure the rails to rack posts and attach the NAS chassis to the sliding rails. No separate fastener kits are required for the listed QNAP models. The hardware enables tool-less chassis removal for drive maintenance while rails remain fixed.

Pontos fortes

  • Secure rack mounting for TS-x79 and TS-ECx80U NAS models
  • Supports up to 125.66 lb load capacity for heavy enclosures
  • Compact 2.72" height fits standard 80U rack spacing
  • Lightweight 5.80 lb steel rails simplify installation
  • Compatible with QNAP NAS, expansion and surveillance servers

Especificações

BrandQNAP
ModelRAIL-A03-57
FeaturesRail Kit for TS-x79 / TS-ECx80U Rackmount Models
Dimensions2.72" x 28.40" x 3.96"
Weight5.80 lbs
Peso de envio2.64 kg
Dimensões da embalagem706 × 102 × 71 mm

Perguntas sobre este artigo

How do I mount the RAIL-A03-57 kit so the TS-x79 enclosure is properly supported?

Align the rails with the cabinet mounting holes, secure the front and rear brackets using the supplied screws, then extend the inner rail sections until they lock; the kit supports up to 125.66 lb load capacity.

What part of the RAIL-A03-57 will need checking or replacement over time?

Inspect the sliding rail bearings and locking latches periodically; lubricate the bearings if movement stiffens and replace any latch that no longer holds the inner rail securely.

What limit appears first when the RAIL-A03-57 carries a fully loaded TS-ECx80U continuously?

The 125.66 lb maximum load capacity is the limiting factor; exceeding it risks rail deformation or latch failure under sustained weight.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.