Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Rectangular steel PSU with perforated vents, 120mm fan, semi-modular cables, bronze efficiency badge

Rosewill

Rosewill VSB650 650W 80+ Bronze semi-modular power supply

SKU CH-7XBK-54D8P MPN VSB650

A 650 W ATX 3.1 semi-modular unit with an 80 PLUS Bronze rating, a 120 mm fan, a 12V-2x6 connector and a 140 mm compact chassis

  • TypeATX 3.1 Compatible
  • Maximum Power650 W
  • Fans1 x 120 mm
  • PFCActive
  • Main Connector20+4Pin
  • +12V RailsSingle

Options ATX 3.1 80+ Bronze (650W)

  • Ready for latest builds with ATX 3.0 and 3.1 compatibility
  • Clean cable routing thanks to semi-modular design and 80 PLUS Bronze efficiency
  • Powers next-gen graphics cards via native 12V-2x6 PCIe 5.1 connector
  • Fits compact cases with 140 mm depth and 35% smaller chassis
  • Reliable cooling from 120 mm ICB fan and Japanese 105°C capacitor

Compact 650 W ATX 3.1 unit

The Rosewill VSB650 is a 650 W semi-modular power supply built to the ATX 3.1 standard. Its 140 mm chassis fits small-form-factor cases while delivering a single +12 V rail rated for the full 650 W. Builders upgrading to PCIe 5.1 graphics cards get a native 12V-2x6 connector rated for 450 W direct GPU power. The 80 PLUS Bronze design reaches up to 85 % efficiency at typical loads.

Replaces older ATX 2.x supplies

Moving from an ATX 2.x unit adds the 12V-2x6 cable and the 3.1 transient-response profile required by modern GPUs. The jump is worth it when the new graphics card specifies a native 12+4 pin connection or when the old supply cannot sustain the 235 % total power excursion spec. The semi-modular layout keeps cable count low in tight builds. Hold-up time is 16 ms minimum.

Steady output under sustained load

A 120 mm ICB silent fan and a steel shell with large vents manage thermals during long sessions. The 105 °C Japanese capacitor maintains rated output at high internal temperatures. Six protection circuits — OCP, OPP, OTP, OVP, SCP and UCP — engage without interrupting delivery. The single-rail design keeps +12 V voltage stable across the full 650 W range.

Pontos fortes

  • Ready for latest builds with ATX 3.0 and 3.1 compatibility
  • Clean cable routing thanks to semi-modular design and 80 PLUS Bronze efficiency
  • Powers next-gen graphics cards via native 12V-2x6 PCIe 5.1 connector
  • Fits compact cases with 140 mm depth and 35% smaller chassis
  • Reliable cooling from 120 mm ICB fan and Japanese 105°C capacitor

Especificações

BrandRosewill
ModelVSB650
TypeATX 3.1 Compatible
Maximum Power650 W
Fans1 x 120 mm
PFCActive
Main Connector20+4Pin
+12V RailsSingle
SATA Power Connector6
CrossFireCrossFire Ready
Max PSU Length140 mm
ModularSemi-Modular
Hold-up Time16ms min.
EfficiencyUp to 85%
Energy-Efficient80 PLUS BRONZE Certified
Over Voltage ProtectionYes
Overload ProtectionYes
Output+3.3V@18A, +5V@18A, [email protected] , [email protected] , +5VSB@3A
Connectors1 x 20+4-Pin Main Connector
2 x 4+4-Pin ATX12V / EPS12V Connector
2 x 6+2-Pin PCI-E Connector
1 x 12+4-Pin 12V-2x6 Connector
6 x 15-Pin SATA Connector
3 x 4-Pin Peripheral Connector
Peso de envio2.06 kg
Dimensões da embalagem267 × 203 × 112 mm

Outras versões deste modelo

Mais 2 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will the 140 mm length fit my small-form-factor case?

The chassis measures 140 mm long by 150 mm wide by 86 mm high, so verify your case clearance against those dimensions before ordering.

Which cables must I connect during installation and which can stay in the box?

The 20+4-pin main and both 4+4-pin EPS cables are permanently attached; plug the 12V-2x6, the two 6+2-pin PCIe, the six SATA and the three peripheral cables only if your build needs them.

When should I plan to replace the 120 mm fan?

The ICB fan uses a 105 °C rated Japanese capacitor; under normal loads expect several years of service, but replace it if bearing noise appears or airflow drops noticeably.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.