SAMSUNG
SAMSUNG PM883 3.84TB SATA 2.5" internal SSD
A 3.84 TB SATA 2.5-inch internal SSD delivering up to 550 MBps sequential read and 520 MBps sequential write with 98,000 random read and 28,000 random write IOPS
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity3.84TB
- Max Sequential ReadUp to 550 MBps
- Max Sequential WriteUp to 520 MBps
- 4KB Random ReadUp to 98,000 IOPS
- 84 TB capacity stores large datasets
- Sequential read up to 550 MB/s speeds data access
- Sequential write up to 520 MB/s accelerates file saves
- Random read up to 98,000 IOPS handles heavy workloads
- 2,000,000-hour MTBF supports long-term reliability
3.84 TB SATA 2.5" SSD
The Samsung PM883 is a 3.84 TB internal solid-state drive built for the standard 2.5-inch SATA 6 Gbps interface. It suits desktops and laptops that need high-capacity, reliable storage without moving parts.
Thermals, noise and power draw
With no mechanical components the drive runs silently and produces minimal heat during typical workloads. Power consumption stays low because the SATA interface and QLC NAND architecture draw only the energy needed for each read or write operation.
Bundled accessories and software
The retail package MZ-7LH3T80 contains the drive only; no mounting bracket, cloning utility or management software is included. Users must supply their own installation hardware and any preferred migration tools.
Pontos fortes
- 84 TB capacity stores large datasets
- Sequential read up to 550 MB/s speeds data access
- Sequential write up to 520 MB/s accelerates file saves
- Random read up to 98,000 IOPS handles heavy workloads
- 2,000,000-hour MTBF supports long-term reliability
Especificações
| Brand | SAMSUNG |
|---|---|
| Series | PM883 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Capacity | 3.84TB |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 98,000 IOPS |
| 4KB Random Write | Up to 28,000 IOPS |
| MTBF | 2,000,000 hours |
Perguntas sobre este artigo
How do I install the PM883 3.84TB drive and what step is often missed?
Mount the 2.5" drive in a bay or caddy, connect the SATA data and power cables, then initialise the 3.84TB volume in the OS — skipping initialisation leaves the drive invisible.
What maintenance or replacement will the PM883 need over its life?
The QLC NAND has a 2,000,000-hour MTBF; no scheduled maintenance is required, but the drive should be replaced once SMART attributes report media wear or reallocated sectors.
What performance limit appears first during sustained writes on the PM883?
After the SLC cache fills, sequential write speed drops below the 520 MBps peak and random write IOPS fall under the 28,000 rating as the QLC media writes directly.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
