Seagate
Seagate ST8000NM0105Product 8 TB 3.5" SATA internal hard drive
Enterprise 3.5-inch SATA hard drive stores 8 TB using six disks for 33% more capacity per slot and advanced write caching for 100% random-write improvement
- NAND Flash Memory TypeSLC
- Massive 8 TB capacity fits more bulk data
- 33 % more storage from six-disk design
- 100 % random-write gain over prior generation
- SATA 600 interface integrates with RAID arrays
- Self-encrypting 512E format protects stored data
Capacity-optimised enterprise drive
The Seagate ST8000NM0105 is an 8 TB 3.5-inch internal hard drive built for bulk-data workloads. It uses a SATA 6 Gb/s interface and 512E advanced format for straightforward integration into replicated or RAID multi-drive servers and storage systems. The drive targets administrators who need high-capacity nearline storage in a standard form factor.
Six-disk platform upgrade
Ninth-generation perpendicular recording technology packs six disks into the same slot, delivering 33% more capacity than the previous five-disk design. Advanced Write Caching applies enhanced algorithms to double random-write performance over the prior generation. The jump is worthwhile when density and sustained write throughput matter more than low access latency.
Sustained nearline workload behaviour
End-to-end SAS-based data integrity, on-the-fly error correction and super parity protect accuracy during continuous operation. A state-of-the-art cache and SLC NAND flash buffer absorb write bursts so that performance efficiencies remain high under prolonged nearline workloads rather than only in short bursts. The drive is not suited for primary boot or low-latency transactional roles.
Pontos fortes
- Massive 8 TB capacity fits more bulk data
- 33 % more storage from six-disk design
- 100 % random-write gain over prior generation
- SATA 600 interface integrates with RAID arrays
- Self-encrypting 512E format protects stored data
Especificações
| Brand | Seagate |
|---|---|
| NAND Flash Memory Type | SLC |
Perguntas sobre este artigo
Does the 3.5-inch 8 TB drive fit a standard 3.5-inch SATA bay?
Yes, it uses the industry-standard 3.5-inch form factor with a SATA 600 interface for direct mounting in any compatible desktop or server bay.
What is the correct way to enable the Advanced Write Caching feature during installation?
Connect the drive via SATA 6Gb/s, then enable write caching in the operating system or RAID controller settings; the step often missed is activating it in the controller BIOS after physical installation.
When should the SLC NAND flash cache be monitored for wear on this 8 TB model?
The SLC cache is designed for the drive's rated workload; monitor SMART attributes for reallocated sectors or cache errors during routine health checks to gauge remaining endurance.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
