Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Square black 60mm case fan with dual ball bearing and two-wire connector

SXDOOL

SXDOOL 2410ML-04W-B60 60mm 12V 0.40A 5300RPM 25CFM 36DBA 2 Pin case fan

SKU CH-BXRD-737FD MPN 2410ML-04W-B60

A 60mm 12V case fan with dual ball bearings delivers 25CFM airflow at 36DBA using a 2‑pin connector

  • TypeCase Fan
  • Fan Size60mm
  • Bearing Type2 Ball
  • RPM5300RPM
  • Air Flow25CFM / 0.71(m3/min)
  • Noise Level36DBA
  • Japan Minebea NMB dual ball bearing for long life
  • 5300 RPM delivers 25 CFM airflow for tight spaces
  • 36 dBA noise level keeps builds quiet
  • 2 pin 12 V connector fits standard headers
  • 60 mm frame suits compact chassis layouts

Compact 60 mm case fan for tight builds

The SXDOOL 2410ML-04W-B60 is a 60 mm frame fan built around a Japan Minebea NMB dual-ball bearing motor. It runs on a 12 V two-pin header and draws 0.40 A at full speed. The unit fits 6025 mounting holes and weighs 65 g, making it suited to small-form-factor chassis or rack enclosures where larger fans cannot be installed.

Thermals noise and power at 5300 RPM

At 5300 RPM the fan moves 25 CFM of air while producing 36 dBA of acoustic noise. The motor operates between 6.0 V and 13.8 V, with an actual running current of 0.30 A and a rated power of 3.60 W. Static pressure reaches 73 AP, helping airflow through restrictive meshes or dense heatsink fins in typical case-cooling scenarios.

Two-wire connector and no lighting

The bundle supplies only the fan itself with red and black leads terminated in a standard motherboard 2P plug. There is no LED illumination, no PWM wire for speed reporting, and no mounting screws or adapters included. Builders who need variable speed control, RGB effects or extra hardware will have to source those separately.

Pontos fortes

  • Japan Minebea NMB dual ball bearing for long life
  • 5300 RPM delivers 25 CFM airflow for tight spaces
  • 36 dBA noise level keeps builds quiet
  • 2 pin 12 V connector fits standard headers
  • 60 mm frame suits compact chassis layouts

Especificações

TypeCase Fan
Fan Size60mm
Bearing Type2 Ball
RPM5300RPM
Air Flow25CFM / 0.71(m3/min)
Noise Level36DBA
Power Connector2 Pin
ColorBlack
LEDNo

Perguntas sobre este artigo

How do I mount the 60mm SXDOOL 2410ML-04W-B60 fan and what step is often missed?

Screw the 60*60*25MM frame into the case fan slots using the four corner holes; the step often missed is checking that the red and black wires reach the motherboard 2P header without strain.

What maintenance or replacement will the dual ball bearing 60mm fan need later?

The 2 Ball bearing design is sealed for life; no lubrication is required, so the fan runs until wear or noise exceeds 36DBA, then you replace the whole unit.

At what point does the 5300RPM fan hit its thermal or electrical limit under sustained load?

Continuous operation is rated up to 13.8V working voltage and 3.60W power; exceeding either voltage or the 0.40A current limit risks motor overheating first.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.