SXDOOL
SXDOOL TA350DC/M35172-57 90mm 2 Ball 3500-3999 RPM 65-70 CFM 40-45 dBA 3 Pin case fan
A 90mm dual-ball case fan with automatic temperature control that adjusts speed from 1300 to 3600 RPM and airflow from 24.2 to 68.23 CFM while keeping noise between 16.5 and 42.7 dBA
- TypeCase Fan
- Fan Size90mm
- Bearing Type2 Ball
- RPM3500-3999 RPM
- Air Flow65-70 CFM
- Noise Level40 - 45 dBA
- Automatic temperature control adjusts speed from 1300 to 3600 RPM
- Dual ball bearing ensures long life and reliable operation
- Delivers 24.2 to 68.23 CFM airflow across the temperature range
- Noise stays between 16.5 and 42.7 dBA depending on load
- Fits DELL Dimension 8100 and 8200 with 3-pin connector
90mm Temperature-Controlled Case Fan
This 90mm case fan uses a dual ball bearing and an integrated temperature probe to adjust speed automatically between 1300 and 3600 RPM. It delivers 24.2 to 68.23 CFM of airflow while producing 16 to 42.7 dBA of noise depending on load. The black, non-LED frame suits builds that prioritise function over lighting.
Replaces Fixed-Speed 90mm Fans
The automatic regulation removes the need for manual fan curves or external controllers in compatible systems. It is a direct fit for Dell Dimension 8100 and 8200 desktops using the proprietary three-pin connector. Builders retrofitting other chassis gain variable cooling without software setup, provided the header supplies 12V at 0.55A.
Three-Pin Voltage Control Limits
The connector lacks a PWM wire so speed changes rely on voltage variation from the motherboard or the onboard thermostat. Shorting the thermostat pins forces full 3600 RPM operation at 68.23 CFM and 42.7 dBA continuously. Headers that cannot vary voltage or that limit current below 0.55A will prevent the fan from reaching its rated performance range.
Pontos fortes
- Automatic temperature control adjusts speed from 1300 to 3600 RPM
- Dual ball bearing ensures long life and reliable operation
- Delivers 24.2 to 68.23 CFM airflow across the temperature range
- Noise stays between 16.5 and 42.7 dBA depending on load
- Fits DELL Dimension 8100 and 8200 with 3-pin connector
Especificações
| Type | Case Fan |
|---|---|
| Fan Size | 90mm |
| Bearing Type | 2 Ball |
| RPM | 3500-3999 RPM |
| Air Flow | 65-70 CFM |
| Noise Level | 40 - 45 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
Perguntas sobre este artigo
Will the 92 mm square frame with 32 mm depth fit my 90 mm case mount?
The fan body measures 92 × 92 × 32 mm, matching the standard 90 mm mounting hole pattern; verify your chassis has 32 mm clearance behind the mounting plane.
How do I connect the three-pin DELL connector to a standard motherboard header?
Plug the three-pin plug directly into any three- or four-pin motherboard fan header; the automatic temperature probe then regulates speed between 1300 and 3600 RPM without PWM.
When should I expect to replace the double-ball bearings?
Dual-ball bearings typically last several years of continuous use; plan replacement if noise rises above the rated 16–42.7 dBA range or airflow drops below 24.2–68.23 CFM.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



