Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black NVME to USB adapter with Type-A connector and silicone heat pad

WRIARICH

WRIARICH NVME to USB Adapter 10Gbps USB 3.1 Gen 2 M.2 NVME 2230 2242 2260 2280 Hard Drive Adapter

SKU CH-JB4D-5Q187

Connects M.2 NVME SSDs in 2230, 2242, 2260 and 2280 sizes to USB 3.1 Gen 2 Type-A at 10 Gbps with JMS583 chip, UASP, TRIM and included heatsink for up to 4 TB

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsM.2 NVME to USB, ELT_NVME_TYPEA_USB_BK, USB Type A, 1, 32 gr
  • Connector AUSB Type A
  • Connector BUSB Type A
  • Connector PlatingSilicone
  • Works with four M.2 NVME lengths from 2230 to 2280
  • Theoretical 10 Gbps transfer via USB 3.1 Gen 2
  • JMS583 controller adds UASP and TRIM support
  • Copper rod and silicone pad keep SSD cool
  • Tool-free setup with included screws and screwdriver

Purpose and audience

This adapter connects M.2 NVME SSDs in 2230, 2242, 2260 and 2280 sizes to a USB Type-A port. It is built for users who need to read or clone NVME drives without opening a laptop or desktop. The device only accepts M-key modules; B-key and B&M-key drives will not fit.

Build and connectors

The PCB carries a copper rod and a silicone thermal pad to draw heat away from the SSD. A USB 3.1 Gen 2 Type-A plug delivers a 10 Gbps link and works with USB 3.0 and 2.0 hosts. Installation uses the supplied screws and screwdriver; no enclosure is included.

Thermals and power

The JMS583 controller supports UASP and TRIM to keep CPU overhead low. Heat is spread through the copper rod and silicone pad, so the drive stays cool during sustained transfers. The adapter draws power solely from the USB bus and supports SSDs up to 4 TB.

Pontos fortes

  • Works with four M.2 NVME lengths from 2230 to 2280
  • Theoretical 10 Gbps transfer via USB 3.1 Gen 2
  • JMS583 controller adds UASP and TRIM support
  • Copper rod and silicone pad keep SSD cool
  • Tool-free setup with included screws and screwdriver

Especificações

BrandSoNNeT
SeriesM.2 NVME to USB
ModelM.2 NVME to USB
Part NumberELT_NVME_TYPEA_USB_BK
ColorBlack
Changer TypeSATA
SpecificationsM.2 NVME to USB, ELT_NVME_TYPEA_USB_BK, USB Type A, 1, 32 grams, Silicone, ELUTENG
Connector AUSB Type A
Connector BUSB Type A
Connector PlatingSilicone
Connector StyleStandard
FeaturesUSB Type A, Silicone, 1, ELUTENG, M.2 NVME to USB
Weight32 grams
Package Quantity1

Perguntas sobre este artigo

What USB standard does the adapter use and what is its maximum theoretical speed?

It uses USB 3.1 Gen 2 with a theoretical transfer speed of 10 Gbps for NVME protocol.

Which M.2 drive lengths and key types does this adapter support?

It supports M-key NVME SSDs in 2230, 2242, 2260 and 2280 sizes. B-key and B&M-key drives are not supported.

How is the drive secured and what step is often missed during installation?

The package includes screws and a screwdriver; the thermal pad must be applied between the SSD and the copper rod on the PCB for proper heat dissipation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.