Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 120mm square case fan 25mm thick three-wire 24V .1A ball bearing

Zyvpee

Zyvpee FD241225LB 120mm 24V 0.1A 3-Wire Case Fan

SKU CH-R6Y0-C0SPE

A 120mm square 24V ball-bearing fan with three wires for CPU cooler mounting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • 24V low-voltage design keeps power draw at 0.1A
  • Ball bearing reduces friction for longer mechanical life
  • 120mm x 120mm x 25mm fits standard 120mm mounting points
  • 3-wire connector enables RPM monitoring by the motherboard
  • Black non-LED frame suits professional or stealth builds

Zyvpee FD241225LB 120mm 24V Fan

This Zyvpee FD241225LB is a 120mm case fan designed for CPU cooler compatibility. It operates on a 24V 0.1A power supply using a 3-wire connector. The unit features a ball bearing and a non-LED black frame. It suits builders needing a direct replacement for inverter cooling setups.

Ball Bearing Thermals and Power

The ball bearing supports consistent rotation for steady airflow across the heatsink. DC square cooler geometry moves air through the fin stack without LED lighting distractions. Power draw stays at 0.1A on the 24V rail during normal operation. Acoustic output remains predictable for server or workstation environments.

24V 3-Wire Voltage Constraint

This fan requires a 24V DC source and a 3-wire header; it will not run on standard 12V motherboard connectors. Buyers without a 24V rail or a compatible inverter board cannot use this part. Verify the voltage and pinout before purchase. No adapter or converter is included.

Pontos fortes

  • 24V low-voltage design keeps power draw at 0.1A
  • Ball bearing reduces friction for longer mechanical life
  • 120mm x 120mm x 25mm fits standard 120mm mounting points
  • 3-wire connector enables RPM monitoring by the motherboard
  • Black non-LED frame suits professional or stealth builds

Especificações

SeriesFD241225LB
ModelFD241225LB
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*25mm

Perguntas sobre este artigo

How do I connect the 3-wire power connector to a 24 V header, and what is the common mistake?

Match the three wires to the header pins — power, ground and tachometer — and ensure the plug is fully seated; the step people get wrong is reversing the power and ground wires, which prevents the fan from spinning.

What maintenance will the ball-bearing FD241225LB need over time?

The ball bearing is sealed and requires no lubrication; if noise or vibration appears after extended use, the entire 120 mm fan should be replaced.

At what point does the 0.1 A current limit become the bottleneck during sustained operation?

The 0.1 A draw is fixed by the motor design, so the limit shows up immediately — the fan cannot exceed its rated airflow regardless of how long it runs.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.