Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

OWC

OWC 8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop RAM for NCR 497-0506041 497-0514577 7702-K138 7761-K131

SKU CH-AD9Q-HRAHB

8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop memory upgrade compatible with NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8 GB capacity lets you run more apps simultaneously
  • DDR3L 1600 speed with CL11 latency improves system responsiveness
  • 35 V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
  • JEDEC and RoHS compliant for a warranty-safe upgrade

8GB DDR3L 1600 SODIMM for NCR systems

This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The part is listed as a direct replacement for NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.

Suits laptops, all-in-one PCs

Builders whose hardware requires DDR3L at 1.35 V and a 204-pin slot can use this module. It is not for systems that need registered or ECC memory, nor for platforms that only accept 1.5 V DDR3. Buyers who need a higher capacity per slot or a different pin layout should look elsewhere.

Voltage is 1.35 V DDR3L

The single specification that decides fit is the 1.35 V operating voltage combined with DDR3L 1600 speed. If the target device specifies 1.5 V DDR3 only, this module will not be compatible. Confirm the system documentation calls for DDR3L 1.35 V before purchase.

Puncte forte

  • 8 GB capacity lets you run more apps simultaneously
  • DDR3L 1600 speed with CL11 latency improves system responsiveness
  • 35 V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Specificații

BrandOWC
Part Number1S6T32R808GB
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Întrebări despre acest articol

Does this 204-pin DDR3L SODIMM fit the NCR 497-0506041 slot?

Yes, the module is built to the JEDEC-standard 204-pin DDR3L form factor and matches the NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.

How do I install the 1S6T32R808GB module without damaging the clips?

Align the notch with the slot key, insert at an angle, then press down evenly until both side clips snap into place — forcing one side first often bends the retention arm.

Will the 1.35V 8GB stick need a firmware update or battery replacement later?

No firmware or battery is involved; the module is a passive JEDEC-compliant DDR3L device, so only a future capacity upgrade would replace it.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.