BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276735BTC
Auf Lager
OWC
OWC 8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop RAM for NCR 497-0506041 497-0514577 7702-K138 7761-K131
8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop memory upgrade compatible with NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8 GB capacity lets you run more apps simultaneously
- DDR3L 1600 speed with CL11 latency improves system responsiveness
- 35 V low-voltage operation reduces power draw and heat
- 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
- JEDEC and RoHS compliant for a warranty-safe upgrade
8GB DDR3L 1600 SODIMM for NCR systems
This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The part is listed as a direct replacement for NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.
Suits laptops, all-in-one PCs
Builders whose hardware requires DDR3L at 1.35 V and a 204-pin slot can use this module. It is not for systems that need registered or ECC memory, nor for platforms that only accept 1.5 V DDR3. Buyers who need a higher capacity per slot or a different pin layout should look elsewhere.
Voltage is 1.35 V DDR3L
The single specification that decides fit is the 1.35 V operating voltage combined with DDR3L 1600 speed. If the target device specifies 1.5 V DDR3 only, this module will not be compatible. Confirm the system documentation calls for DDR3L 1.35 V before purchase.
Besonderheiten
- 8 GB capacity lets you run more apps simultaneously
- DDR3L 1600 speed with CL11 latency improves system responsiveness
- 35 V low-voltage operation reduces power draw and heat
- 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
- JEDEC and RoHS compliant for a warranty-safe upgrade
Technische Daten
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Fragen zu diesem Artikel
Does this 204-pin DDR3L SODIMM fit the NCR 497-0506041 slot?
Yes, the module is built to the JEDEC-standard 204-pin DDR3L form factor and matches the NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.
How do I install the 1S6T32R808GB module without damaging the clips?
Align the notch with the slot key, insert at an angle, then press down evenly until both side clips snap into place — forcing one side first often bends the retention arm.
Will the 1.35V 8GB stick need a firmware update or battery replacement later?
No firmware or battery is involved; the module is a passive JEDEC-compliant DDR3L device, so only a future capacity upgrade would replace it.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
