We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green OWC 8GB DDR3L 204-pin SODIMM module with gold contacts

OWC

OWC 8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop RAM for NCR 497-0506041 497-0514577 7702-K138 7761-K131

SKU CH-AD9Q-HRAHB

8GB DDR3L 1600 CL11 1.35V 204-pin SODIMM laptop memory upgrade compatible with NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8 GB capacity lets you run more apps simultaneously
  • DDR3L 1600 speed with CL11 latency improves system responsiveness
  • 35 V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
  • JEDEC and RoHS compliant for a warranty-safe upgrade

8GB DDR3L 1600 SODIMM for NCR systems

This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The part is listed as a direct replacement for NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.

Suits laptops, all-in-one PCs

Builders whose hardware requires DDR3L at 1.35 V and a 204-pin slot can use this module. It is not for systems that need registered or ECC memory, nor for platforms that only accept 1.5 V DDR3. Buyers who need a higher capacity per slot or a different pin layout should look elsewhere.

Voltage is 1.35 V DDR3L

The single specification that decides fit is the 1.35 V operating voltage combined with DDR3L 1600 speed. If the target device specifies 1.5 V DDR3 only, this module will not be compatible. Confirm the system documentation calls for DDR3L 1.35 V before purchase.

Highlights

  • 8 GB capacity lets you run more apps simultaneously
  • DDR3L 1600 speed with CL11 latency improves system responsiveness
  • 35 V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits laptops, all-in-ones and NAS units
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Specifications

BrandOWC
Part Number1S6T32R808GB
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Questions about this item

Does this 204-pin DDR3L SODIMM fit the NCR 497-0506041 slot?

Yes, the module is built to the JEDEC-standard 204-pin DDR3L form factor and matches the NCR part numbers 497-0506041, 497-0514577, 7702-K138 and 7761-K131.

How do I install the 1S6T32R808GB module without damaging the clips?

Align the notch with the slot key, insert at an angle, then press down evenly until both side clips snap into place — forcing one side first often bends the retention arm.

Will the 1.35V 8GB stick need a firmware update or battery replacement later?

No firmware or battery is involved; the module is a passive JEDEC-compliant DDR3L device, so only a future capacity upgrade would replace it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.