Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM ME44800-328K1 32GB DDR5 5600 ECC UDIMM memory upgrade

SKU CH-R1MT-FVENR

32 GB DDR5 5600 ECC UDIMM with CL46 latency and 1.1 V operation, validated for Supermicro X14SAE motherboards

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Exact-match upgrade for Supermicro X14SAE

This 32 GB DDR5-5600 ECC UDIMM module is built to the precise rank, voltage and timing the Supermicro X14SAE motherboard expects. It installs as a single 288-pin unbuffered DIMM running at 1.1 V with CL46 latency, delivering 32 GB of error-correcting memory that the board recognises at full rated speed.

Who this suits and who should look elsewhere

Builders upgrading a Supermicro X14SAE system that requires DDR5-5600 ECC UDIMM modules will find the correct form factor and specification here. Buyers whose platforms need registered RDIMMs, SODIMMs, non-ECC memory or a different DDR generation cannot use this kit.

Installation notes

The module seats in a standard 288-pin DDR5 UDIMM slot; align the notch and press firmly until the retention clips click. Common issues include mixing this unbuffered ECC stick with registered DIMMs, populating slots in an order the motherboard manual forbids, or forgetting to enable ECC in the BIOS after installation.

I korthet

  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does my Supermicro X14SAE motherboard need a specific DIMM population order for this 32GB DDR5 5600 ECC UDIMM?

Yes, the board's manual lists supported capacities and the required installation sequence; follow that order so the memory controller recognises the full 32 GB at 5600 MT/s.

Can I install this 2Rx8 DDR5 5600 ECC UDIMM in a slot that currently holds a 1Rx8 DDR5 4800 module?

Mixing ranks and speeds forces the memory controller to run all DIMMs at the lowest common speed and may disable ECC; use identical 2Rx8 5600 modules for full rated performance.

How do I verify the kit is running at DDR5 5600 with ECC active after installation?

Enter the BIOS or run a hardware-information utility and confirm the reported speed shows 5600 MT/s, CL46 timings, 1.1 V and that ECC status reads enabled.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.