نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME44800-328K1 32GB DDR5 5600 ECC UDIMM memory upgrade

SKU CH-R1MT-FVENR

32 GB DDR5 5600 ECC UDIMM with CL46 latency and 1.1 V operation, validated for Supermicro X14SAE motherboards

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Exact-match upgrade for Supermicro X14SAE

This 32 GB DDR5-5600 ECC UDIMM module is built to the precise rank, voltage and timing the Supermicro X14SAE motherboard expects. It installs as a single 288-pin unbuffered DIMM running at 1.1 V with CL46 latency, delivering 32 GB of error-correcting memory that the board recognises at full rated speed.

Who this suits and who should look elsewhere

Builders upgrading a Supermicro X14SAE system that requires DDR5-5600 ECC UDIMM modules will find the correct form factor and specification here. Buyers whose platforms need registered RDIMMs, SODIMMs, non-ECC memory or a different DDR generation cannot use this kit.

Installation notes

The module seats in a standard 288-pin DDR5 UDIMM slot; align the notch and press firmly until the retention clips click. Common issues include mixing this unbuffered ECC stick with registered DIMMs, populating slots in an order the motherboard manual forbids, or forgetting to enable ECC in the BIOS after installation.

أبرز المميزات

  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does my Supermicro X14SAE motherboard need a specific DIMM population order for this 32GB DDR5 5600 ECC UDIMM?

Yes, the board's manual lists supported capacities and the required installation sequence; follow that order so the memory controller recognises the full 32 GB at 5600 MT/s.

Can I install this 2Rx8 DDR5 5600 ECC UDIMM in a slot that currently holds a 1Rx8 DDR5 4800 module?

Mixing ranks and speeds forces the memory controller to run all DIMMs at the lowest common speed and may disable ECC; use identical 2Rx8 5600 modules for full rated performance.

How do I verify the kit is running at DDR5 5600 with ECC active after installation?

Enter the BIOS or run a hardware-information utility and confirm the reported speed shows 5600 MT/s, CL46 timings, 1.1 V and that ECC status reads enabled.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.