我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME44800-328K1 32GB DDR5 5600 ECC UDIMM memory upgrade

SKU CH-R1MT-FVENR

32 GB DDR5 5600 ECC UDIMM with CL46 latency and 1.1 V operation, validated for Supermicro X14SAE motherboards

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Exact-match upgrade for Supermicro X14SAE

This 32 GB DDR5-5600 ECC UDIMM module is built to the precise rank, voltage and timing the Supermicro X14SAE motherboard expects. It installs as a single 288-pin unbuffered DIMM running at 1.1 V with CL46 latency, delivering 32 GB of error-correcting memory that the board recognises at full rated speed.

Who this suits and who should look elsewhere

Builders upgrading a Supermicro X14SAE system that requires DDR5-5600 ECC UDIMM modules will find the correct form factor and specification here. Buyers whose platforms need registered RDIMMs, SODIMMs, non-ECC memory or a different DDR generation cannot use this kit.

Installation notes

The module seats in a standard 288-pin DDR5 UDIMM slot; align the notch and press firmly until the retention clips click. Common issues include mixing this unbuffered ECC stick with registered DIMMs, populating slots in an order the motherboard manual forbids, or forgetting to enable ECC in the BIOS after installation.

商品特色

  • 32 GB capacity handles large workloads and virtual machines
  • DDR5 5600 speed transfers data at up to 5600 MT/s
  • ECC protection detects and corrects single-bit errors automatically
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does my Supermicro X14SAE motherboard need a specific DIMM population order for this 32GB DDR5 5600 ECC UDIMM?

Yes, the board's manual lists supported capacities and the required installation sequence; follow that order so the memory controller recognises the full 32 GB at 5600 MT/s.

Can I install this 2Rx8 DDR5 5600 ECC UDIMM in a slot that currently holds a 1Rx8 DDR5 4800 module?

Mixing ranks and speeds forces the memory controller to run all DIMMs at the lowest common speed and may disable ECC; use identical 2Rx8 5600 modules for full rated performance.

How do I verify the kit is running at DDR5 5600 with ECC active after installation?

Enter the BIOS or run a hardware-information utility and confirm the reported speed shows 5600 MT/s, CL46 timings, 1.1 V and that ECC status reads enabled.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。