A-Tech
A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 server RAM
16GB DDR5-4800 ECC UDIMM server memory module with 1Rx8 rank and 1.10V operation
- Capacity16GB
- Type288-Pin DDR5 SDRAM
- SpeedDDR5 4800 (PC5 38400)
- CAS Latency40
- Voltage1.10V
- ECCYes
- 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
- ECC protection safeguards data integrity for mission-critical workloads
- 1Rx8 single-rank design optimises memory controller efficiency
- 10V standard voltage reduces power draw per module
- 288-pin UDIMM fits compatible DDR5 server platforms
16GB DDR5 4800 ECC UDIMM Server RAM
This 16GB DDR5 module runs at 4800MHz with CAS latency 40 and 1.10V operation. It uses a 288-pin unbuffered DIMM layout with 1Rx8 organisation and on-die ECC for data integrity in server workloads.
Suits servers needing single-rank ECC UDIMM upgrades
Not suited for platforms that require registered or load-reduced DIMMs, nor for consumer boards lacking DDR5 ECC UDIMM support. Buyers needing higher density per slot or registered signalling should look elsewhere.
Installs like any standard 288-pin DDR5 UDIMM
Align the notch, press firmly until the retention clips click, and follow the system manual for channel population rules. Common issues arise when mixing ranks or using non-ECC slots that disable error correction.
จุดเด่น
- 16GB DDR5 4800MHz boosts server throughput with PC5-38400 bandwidth
- ECC protection safeguards data integrity for mission-critical workloads
- 1Rx8 single-rank design optimises memory controller efficiency
- 10V standard voltage reduces power draw per module
- 288-pin UDIMM fits compatible DDR5 server platforms
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston KTH-PL548E-16G |
| Model | A-Tech 16GB DDR5-4800 ECC UDIMM Server RAM Module |
| Capacity | 16GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
คำถามเกี่ยวกับสินค้านี้
Will this 288-pin DDR5 4800 module work in my current motherboard?
This module requires a motherboard with a 288-pin DDR5 DIMM slot that supports DDR5 4800 speed, ECC UDIMM, and 1.10 V operation.
Can I add this 1Rx8 ECC stick alongside my existing DDR5 non-ECC memory?
Mixing ECC and non-ECC modules is not supported; the system will either disable ECC or fail to boot, so all slots should use ECC UDIMMs.
How do I verify the CAS latency 40 and 4800 MT/s are active after installation?
Enter the BIOS or use a tool such as CPU-Z to confirm the memory runs at DDR5 4800 with CL40 timings and shows ECC enabled.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



