EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
16GB DDR5-4800 ECC UDIMM server memory module with 1Rx8 rank and 1.10V operation
This 16GB DDR5 module runs at 4800MHz with CAS latency 40 and 1.10V operation. It uses a 288-pin unbuffered DIMM layout with 1Rx8 organisation and on-die ECC for data integrity in server workloads.
Not suited for platforms that require registered or load-reduced DIMMs, nor for consumer boards lacking DDR5 ECC UDIMM support. Buyers needing higher density per slot or registered signalling should look elsewhere.
Align the notch, press firmly until the retention clips click, and follow the system manual for channel population rules. Common issues arise when mixing ranks or using non-ECC slots that disable error correction.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston KTH-PL548E-16G |
| Model | A-Tech 16GB DDR5-4800 ECC UDIMM Server RAM Module |
| Capacity | 16GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
This module requires a motherboard with a 288-pin DDR5 DIMM slot that supports DDR5 4800 speed, ECC UDIMM, and 1.10 V operation.
Mixing ECC and non-ECC modules is not supported; the system will either disable ECC or fail to boot, so all slots should use ECC UDIMMs.
Enter the BIOS or use a tool such as CPU-Z to confirm the memory runs at DDR5 4800 with CL40 timings and shows ECC enabled.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
No language matches that.
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?