A-Tech
A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 Server RAM
8GB DDR3 1600 ECC registered DIMM with 1Rx4 organisation for server memory upgrades
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- ECC registered design protects data integrity in servers
- 1Rx4 rank optimises signal loading on registered channels
- DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
- Standard 1.50 V DDR3 voltage matches server DIMM power rails
- 240-pin DIMM form factor fits registered DDR3 server slots
8 GB DDR3 1600 ECC RDIMM
This module adds eight gigabytes of registered DDR3 memory running at 1600 MHz with a CAS latency of 11. It is built for servers and workstations that require error-correcting code and registered signalling for data integrity.
240-pin registered DIMM with 1Rx4 layout
The 240-pin form factor fits standard DDR3 server slots while the single-rank-by-four organisation keeps electrical loading low on populated channels. Operation at 1.5 V matches the DDR3 standard voltage for broad platform compatibility.
Direct replacement for Micron MT18JDF1G72PZ-1G6
The module matches the Micron MT18JDF1G72PZ-1G6, MT18JSF1G72PZ-1G6 and MT18JSF1G72PZ-1G6D1 part numbers. The upgrade is worthwhile when a system needs additional ECC capacity or when existing modules have reached their limit.
จุดเด่น
- ECC registered design protects data integrity in servers
- 1Rx4 rank optimises signal loading on registered channels
- DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
- Standard 1.50 V DDR3 voltage matches server DIMM power rails
- 240-pin DIMM form factor fits registered DDR3 server slots
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
คำถามเกี่ยวกับสินค้านี้
What DDR3 speed and PC rating does this 8 GB RDIMM use?
It runs at DDR3 1600 MHz and carries a PC3-12800 rating, delivering standard DDR3 1600 performance for registered server memory.
Which slot type and pin count does this module need to fit?
It requires a 240-pin DDR3 DIMM slot, the standard form factor for registered DDR3 server memory.
How do I install this ECC RDIMM correctly?
Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retaining clips click, then verify the full 8 GB appears in the BIOS or OS memory report.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



