EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
An 8 GB DDR3L 1600 MHz ECC registered DIMM for server and workstation upgrades
This A-Tech module delivers 8 GB of DDR3L 1600 memory in a registered DIMM format designed for server and workstation platforms. It operates at 1.35 V low voltage with CL11 latency and uses Samsung chipset components. The stick is a direct compatible replacement for Samsung M392B1G70DB0-YK0.
The single specification that decides fit is the registered ECC design with 1Rx4 rank configuration on a 240-pin DDR3L interface. Systems requiring unbuffered non-ECC DIMMs or a different rank layout will not accept this module. Verify the motherboard qualification list before purchase.
Installation follows the usual DIMM slot procedure: align the notch, press firmly until the retention clips lock, and confirm seating. The most common issue is mixing registered ECC with unbuffered memory or populating slots in an order the platform firmware does not support, which prevents boot.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1G70DB0-YK0 |
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | M392B1G70DB0-YK0 |
The module runs at DDR3L 1600 MHz with CL11 latency, providing the rated PC3L 12800 data rate when the platform operates at that speed.
Registered ECC adds a clock cycle for buffering and enables single-bit error correction, so the system sees the full 8 GB at up to 1600 MHz if the memory controller supports registered DIMMs.
It uses the standard 240-pin DDR3 DIMM form factor with 1.35 V low-voltage operation; verify your platform accepts DDR3L registered ECC modules before installing.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม