A-Tech
A-Tech 8GB DDR5-5600 Desktop RAM Module
An 8 GB DDR5 desktop module running at 5600 MHz with CAS latency 40 and 1.10 V on a 288-pin DIMM
- Capacity8GB
- SpeedDDR5 5600 (PC5 44800)
- Tested Frequency5600
- CAS Latency40
- Voltage1.10V
- ECCNo
- Boosts multitasking with 8GB DDR5-5600 capacity
- Runs at 5600MHz speed for faster data transfer
- Low 1.10V voltage reduces power consumption
- 288-pin DIMM fits standard desktop slots
- CL40 latency supports responsive system performance
Ready for Dell DDR5 Desktops
This A-Tech module is built as a direct replacement for the Dell SNPGDGT0C/8G part. It brings 8 GB of DDR5 memory to compatible desktop systems that require a 288-pin DIMM running at 5600 MT/s.
Suits Non-ECC Platforms Only
The stick is unbuffered and non-ECC, so it fits standard consumer desktops that accept 1Rx16 modules at 1.1 V. Systems that require registered or error-correcting memory will not work with this unit.
Speed Decides Compatibility
The rated data rate is 5600 MT/s, labelled PC5-44800, with a CAS latency of 40. If your motherboard or Dell chassis specifies a different DDR5 speed grade, this module will not match the required timing.
จุดเด่น
- Boosts multitasking with 8GB DDR5-5600 capacity
- Runs at 5600MHz speed for faster data transfer
- Low 1.10V voltage reduces power consumption
- 288-pin DIMM fits standard desktop slots
- CL40 latency supports responsive system performance
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell SNPGDGT0C/8G |
| Model | A-Tech 8GB DDR5-5600 Desktop RAM Module |
| Capacity | 8GB |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Dell SNPGDGT0C/8G |
คำถามเกี่ยวกับสินค้านี้
Is the 8 GB module the only capacity offered for this DDR5-5600 stick?
The listing shows a single 8 GB DIMM; no other capacities are mentioned for this part number.
What does the 5600 MT/s rating mean when the module is installed in a desktop?
The memory runs at 5600 MT/s with CAS 40 at 1.1 V, delivering the standard DDR5 JEDEC speed without overclocking.
Does the 288-pin DDR5 DIMM fit every desktop board that has DDR5 slots?
It uses the standard 288-pin DDR5 DIMM form factor; compatibility still depends on the motherboard’s qualified-vendor list.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



