KHACHIMO
KHACHIMO ATX power supply 27V 22.2A 600W 80 PLUS Gold
Delivers 600 W at 27 V and 22.2 A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power operation
- TypeATX
- Fast wake from sleep with Modern Standby support
- High efficiency cuts consumption with 80 PLUS Gold
- Silent operation at low load via Zero RPM fan
- Clean, stable power from LLC resonant topology
- Delivers 600 W at 27 V and 22.2 A
27 V ATX power supply
This KHACHIMO unit delivers a single 27 V rail rated at 22.2 A for 600 W total output. It carries 80 PLUS Gold certification and uses resonant LLC topology with DC-to-DC conversion. Modern Standby compatibility and a zero-RPM fan mode keep the system quiet at low loads.
Suited for industrial or specialised builds
Designed for equipment that requires a dedicated 27 V source, such as certain embedded or industrial systems. It is not for standard desktop PCs that need the conventional multi-voltage ATX pinout.
27 V 22.2 A single-rail output
The defining specification is the fixed 27 V rail providing up to 22.2 A. Only choose this supply if your hardware explicitly demands that exact voltage and current combination.
จุดเด่น
- Fast wake from sleep with Modern Standby support
- High efficiency cuts consumption with 80 PLUS Gold
- Silent operation at low load via Zero RPM fan
- Clean, stable power from LLC resonant topology
- Delivers 600 W at 27 V and 22.2 A
ข้อมูลจำเพาะ
| Type | ATX |
|---|
คำถามเกี่ยวกับสินค้านี้
How do I install the KHACHIMO ATX power supply and what step is often missed?
Mount the unit in a standard ATX case using four screws, connect the 24-pin motherboard and CPU power cables, then verify the power switch is set to 27 V before first boot.
What maintenance or replacement will this 600 W supply need later?
The Zero RPM fan mode keeps the fan off at low and medium loads; clean dust from the intake vents annually and replace the fan only if bearing noise appears after extended high-load use.
What limit appears first during sustained full-load operation?
Continuous output is capped at 600 W with 22.2 A on the 27 V rail; exceeding either value triggers over-current protection and shuts the unit down.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



