Kingston Technology Corp.
Kingston Technology Corp. KVR16LE11S8/4 4GB DDR3 1600 ECC Unbuffered CL11 1.35V Server RAM
4GB DDR3 ECC unbuffered server memory running at 1600 MHz with CL11 latency and 1.35V operation
- Capacity4GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- ECC protection guards server data integrity
- Unbuffered DDR3 design fits standard 240-pin DIMM slots
- Low 1.35 V operation reduces system power draw
- 1600 MHz speed with CL11 latency supports responsive workloads
- Validated for listed Supermicro server and motherboard models
4GB DDR3 ECC Unbuffered DIMM
This 4GB DDR3-1600 module delivers error-correcting code protection in an unbuffered 240-pin form factor. It operates at 1.35V with a CAS latency of CL11 and conforms to the PC3-12800 standard. The single stick is designed for server platforms that require ECC memory without registered signalling.
Suits Supermicro servers needing low-voltage ECC
The module is validated for specific Supermicro systems including A+ 1042G-LTF and several 2022TG and H8QGL motherboard variants. Builders working with consumer desktop boards or platforms that demand registered DIMMs should look elsewhere. Systems requiring higher capacities per slot will also need a different part.
240-pin DDR3 interface
The 240-pin DDR3 interface combined with ECC unbuffered operation is the single specification that determines compatibility. Only motherboards wired for unbuffered ECC DDR3 at 1.35V can accept this module. Verify your platform supports this exact configuration before purchasing.
จุดเด่น
- ECC protection guards server data integrity
- Unbuffered DDR3 design fits standard 240-pin DIMM slots
- Low 1.35 V operation reduces system power draw
- 1600 MHz speed with CL11 latency supports responsive workloads
- Validated for listed Supermicro server and motherboard models
ข้อมูลจำเพาะ
| Brand | Kingston |
|---|---|
| Model | KVR16LE11S8/4 |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | w/TS SR x4 |
| น้ำหนักในการจัดส่ง | 0.02 kg |
| ขนาดบรรจุภัณฑ์ | 169 × 55 × 13 mm |
คำถามเกี่ยวกับสินค้านี้
Will my server motherboard accept a 240-pin DDR3 1600 DIMM running at 1.35V?
This module is a 240-pin DDR3 DIMM rated for 1600 MHz at 1.35V; it fits any server board with DDR3 slots that support that voltage and speed.
Can I mix this unbuffered ECC stick with registered ECC modules already installed?
Unbuffered and registered ECC memory cannot be mixed in the same server; all DIMMs must use the same signal-processing type for the system to function.
How can I verify the module runs at CL11 1600 MHz after installation?
Enter the BIOS or use a tool such as CPU-Z to confirm the memory reports 1600 MHz, CAS latency 11 and ECC active.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



