myVolts
myVolts 2400W Mining Power Supply 8 GPU 220V 14cm Fan 95% Efficiency
A 2400 W mining power supply supporting eight graphics cards with sixteen 6+2-pin connectors, a 14 cm thermally controlled fan, 95 % conversion efficiency and over-temperature protection at 50 °C
- TypeAT
- Supports up to 8 graphics cards with 2400W output
- 95% conversion rate reduces electricity waste
- Auto thermal protection activates above 50 degrees
- 14cm silent fan with dust cover for cooling
- Pure copper core cables and metal shell for durability
2400W mining PSU for eight GPUs
The myVolts unit delivers 2400 W at 220 V and provides sixteen 6+2-pin connectors to feed up to eight graphics cards. A single 24-pin ATX and one 4+4-pin EPS connector power the motherboard, while eight Sata and four large 4-pin leads handle risers and peripherals. The 95 % conversion rate reduces waste heat during continuous mining loads.
Sustained load with auto thermal control
A 14 cm fan spins under automatic thermal regulation to keep internal temperatures in check during round-the-clock operation. If the internal temperature exceeds 50 °C the protection circuit activates and shuts the unit down to prevent damage. The metal chassis and pure copper wiring are built to withstand prolonged high-current draw without degradation.
220 V input and physical limits
The power supply operates only at 220 V, so a step-up transformer is required in regions with lower mains voltage. Dimensions are 165 x 150 x 86 mm, allowing it to fit on standard mining shelves. A fitted dust cover adds moisture and dust resistance for harsh environments.
จุดเด่น
- Supports up to 8 graphics cards with 2400W output
- 95% conversion rate reduces electricity waste
- Auto thermal protection activates above 50 degrees
- 14cm silent fan with dust cover for cooling
- Pure copper core cables and metal shell for durability
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
How loud is the 14cm fan when the 2400W supply runs continuously?
The 14cm fan is thermally controlled and spins up only when needed; high-temperature protection activates at 50°C to prevent damage.
What mains voltage must be available for this 220V unit to deliver full power?
It requires a stable 220V supply; if your outlet is lower you will need a step-up transformer before connecting it.
Can I keep my existing Sata drives and 6+2pin GPU cables with this supply?
Yes — it provides eight Sata connectors and sixteen 6+2pin cables, so current drives and GPUs plug in directly.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



