EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
A 2400 W mining power supply supporting eight graphics cards with sixteen 6+2-pin connectors, a 14 cm thermally controlled fan, 95 % conversion efficiency and over-temperature protection at 50 °C
The myVolts unit delivers 2400 W at 220 V and provides sixteen 6+2-pin connectors to feed up to eight graphics cards. A single 24-pin ATX and one 4+4-pin EPS connector power the motherboard, while eight Sata and four large 4-pin leads handle risers and peripherals. The 95 % conversion rate reduces waste heat during continuous mining loads.
A 14 cm fan spins under automatic thermal regulation to keep internal temperatures in check during round-the-clock operation. If the internal temperature exceeds 50 °C the protection circuit activates and shuts the unit down to prevent damage. The metal chassis and pure copper wiring are built to withstand prolonged high-current draw without degradation.
The power supply operates only at 220 V, so a step-up transformer is required in regions with lower mains voltage. Dimensions are 165 x 150 x 86 mm, allowing it to fit on standard mining shelves. A fitted dust cover adds moisture and dust resistance for harsh environments.
| Type | AT |
|---|
The 14cm fan is thermally controlled and spins up only when needed; high-temperature protection activates at 50°C to prevent damage.
It requires a stable 220V supply; if your outlet is lower you will need a step-up transformer before connecting it.
Yes — it provides eight Sata connectors and sixteen 6+2pin cables, so current drives and GPUs plug in directly.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?