Phanteks
Phanteks PH-GEF_KIT360-D30_DWT 360mm DIY cooling
Complete DIY water-cooling kit with 360mm radiator, CPU block, reservoir, three 120mm RGB fans, 3 metres of clear PVC tubing.
- TypeComplete DIY Water-Cooling Kit
- Block CompatibilityIntel: LGA 1700 AMD: AM4 /AM5
- Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
- Radiator Size360mm
- Fan Size3 Fan Slots (120 mm)
- Tube Dim.3 meters
- Complete kit includes every part for a custom loop
- Integrated fittings on blocks, radiator and reservoir simplify assembly
- 360 mm radiator with three 120 mm fans delivers high heat capacity
- CPU block fits Intel LGA 1700 and AMD AM4/AM5 sockets
- Bending tools and 3 m clear PVC tubing enable hard-tube builds
Complete DIY Water-Cooling Kit
The Phanteks Glacier EZ-Fit 360 D30-KIT is a complete DIY water-cooling kit that includes a CPU block, reservoir, 360mm radiator, three 120mm fans, hard tubing and bending tools. It supports Intel LGA 1700 and AMD AM4/AM5 sockets. The white finish and RGB lighting suit builders who want a coordinated aesthetic. Everything required for a custom loop arrives in one box.
Upgrade From Air Or AIO Cooling
This kit replaces stock air coolers or closed-loop AIOs when lower noise and higher thermal headroom are priorities. The jump is worth it if the case fits a 360mm radiator and the builder wants full control over tubing runs. It is not for buyers who need a drop-in solution without case modifications or who prefer maintenance-free cooling.
Installation With Included Tools
Integrated fittings on the block, radiator and reservoir simplify assembly, while the supplied tube cutter, bending insert, guides and sandpaper help shape the 3 meters of clear PVC tubing. The 24-pin jumper allows pump testing before the system powers on. Common issues include measuring tube lengths incorrectly and leaving air bubbles trapped in the loop.
จุดเด่น
- Complete kit includes every part for a custom loop
- Integrated fittings on blocks, radiator and reservoir simplify assembly
- 360 mm radiator with three 120 mm fans delivers high heat capacity
- CPU block fits Intel LGA 1700 and AMD AM4/AM5 sockets
- Bending tools and 3 m clear PVC tubing enable hard-tube builds
ข้อมูลจำเพาะ
| Brand | Phanteks |
|---|---|
| Model | PH-GEF_KIT360-D30_DWT |
| Type | Complete DIY Water-Cooling Kit |
| Block Compatibility | Intel: LGA 1700 AMD: AM4 /AM5 |
| Block Dim. | 72 x 64 x 25.7mm (2.83 x 2.52 x 1in) |
| Radiator Size | 360mm |
| Fan Size | 3 Fan Slots (120 mm) |
| Tube Dim. | 3 meters |
| Tube Material | Clear PVC |
| Package Contents | PH-GEF_RAD363_WT 1x PH-GEF_CPU450_DWT 1x PH-GEF_RES140_DWT 1x PH-GEF_ST16_CL 1x PH-GEF_HT16_FR 4x PH-F120D30_DRGB_PWM_WT01_3P 1x Tube Cutter 1x Bending Insert 1x Bending Guides 1x Squeeze Bottle 1x 24-Pin Jumper 1x Sandpaper 1x Tool Set Manual 1x GLACIER EZ-FIT KIT Manual 1x |
| น้ำหนักในการจัดส่ง | 7.33 kg |
| ขนาดบรรจุภัณฑ์ | 978 × 406 × 244 mm |
คำถามเกี่ยวกับสินค้านี้
What clearance does the 360mm radiator and 120mm fans need inside my case?
The radiator is 360mm long and uses three 120mm fan slots; verify your case supports a 360mm radiator with 30mm thickness plus fan depth.
How do I bend the 16mm hard tubes without kinking them?
Use the supplied bending insert and guides, heat the clear PVC tube evenly, then bend over the guide; the tube cutter and sandpaper prepare clean ends for the compression fittings.
When should I replace the clear PVC tubing and coolant?
Inspect tubing every 12 months for clouding or plasticiser buildup; drain, flush with distilled water, and refill with fresh coolant at that interval.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.0000105BTC
มีสินค้า