BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
16 GB DDR4 laptop module running at 2133 MHz CL15 with 1.2 V, 260-pin SO-DIMM form factor
This A-Tech module delivers 16GB of DDR4 memory at 2133MHz with CL15 latency. It uses a 260-pin SO-DIMM form factor and operates at the standard 1.2V. The unbuffered, non-ECC design suits mainstream laptop and all-in-one systems.
The module matches HP part numbers T0H91AT, X2E91UT, T7B78AA, and 866261-001. Builders requiring ECC error correction or registered DIMMs should look elsewhere. Systems limited to 8GB per slot or lower DDR4 speeds cannot use this memory.
Only devices with DDR4 SO-DIMM slots accepting 2133MHz PC4-17000 unbuffered non-ECC modules can install this RAM. Verify your system documentation for supported speed, voltage, and maximum capacity per slot before purchasing.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the system, unplug the charger, remove the battery if accessible, then insert the module at an angle until the gold contacts are hidden and press down until the side clips click into place.
No scheduled maintenance is required; keep the memory slot free of dust and the module will last the life of the laptop unless a higher capacity or speed upgrade is desired.
The DDR4 2133MHz speed and CL15 latency set the throughput ceiling, so bandwidth saturates before voltage or temperature become a constraint.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?