A-Tech
A-Tech 16GB DDR4 2133MHz CL15 ECC SODIMM 260-Pin 1.2V
16 GB DDR4 ECC SODIMM module running at 2133 MHz with CL15 latency and 1.2 V operation for compatible Dell server or workstation laptops
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16 GB DDR4 capacity handles heavier workloads
- ECC error correction protects data integrity in servers
- CL15 latency at 2133 MHz delivers responsive performance
- 2 V standard voltage keeps power draw low
- 260-pin SODIMM form factor fits compatible laptop slots
Capacity & Compatibility
This 16 GB DDR4 SO-DIMM module runs at 2133 MHz with CL15 latency and operates at the standard 1.2 V. It uses a 260-pin layout and includes ECC error correction in an unbuffered design, making it suitable for compatible server or workstation laptops that require registered-style reliability without registered signalling. The sticks are validated as direct replacements for Dell part numbers SNP739XRC/16G, A8547957 and A8860720.
Thermals & Power
The module draws power only at the JEDEC-standard 1.2 V, so it adds minimal heat to a laptop chassis and does not require active cooling beyond the system's existing airflow. Because it is an unbuffered ECC design, there is no register chip to generate extra warmth, keeping thermal output comparable to ordinary non-ECC SO-DIMMs during typical workloads.
Chip Quality & Support
A-Tech fits each board with major-brand DRAM components and subjects every unit to a full quality-assurance test cycle before it ships. The manufacturer backs the module with a lifetime warranty and provides US-based technical support for installation or compatibility questions, giving buyers a direct path to assistance if the memory does not post in their specific platform. Builders who need registered RDIMMs or capacities above 16 GB per slot cannot use this module.
商品特色
- 16 GB DDR4 capacity handles heavier workloads
- ECC error correction protects data integrity in servers
- CL15 latency at 2133 MHz delivers responsive performance
- 2 V standard voltage keeps power draw low
- 260-pin SODIMM form factor fits compatible laptop slots
商品規格
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
商品問答
How do I install the 260-pin DDR4 SODIMM and what step is often missed?
Align the notch on the module with the slot key, press firmly until the side clips click, then verify in BIOS that the 16GB ECC module is detected at 2133MHz CL15.
What maintenance or replacement will this ECC SODIMM need over time?
No routine maintenance is required; if a correctable error count rises or the module fails, replace it with another 16GB DDR4 2133MHz CL15 ECC SODIMM.
What limit appears first during sustained workloads on this 1.2V ECC memory?
The 2133MHz CL15 bandwidth ceiling is reached before voltage or thermal limits under continuous server or workstation loads.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



