A-Tech
A-Tech 4GB DDR3L 1333 ECC SODIMM 1.35V 1Rx8
4GB DDR3L ECC SODIMM runs at 1333 MHz with 1.35V low-voltage operation for compatible microservers and NAS units
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
Capacity 4GB
Speed DDR3L 1333 (PC3L 10600)
- DDR3 1333 (PC3 10600)
- DDR3 1600 (PC3 12800)
- DDR3L 1333 (PC3L 10600)
- DDR3L 1600 (PC3L 12800)
CAS Latency CL9
- CL9
- CL11
- ECC protection guards data integrity in critical workloads
- 35V DDR3L cuts power draw versus standard DDR3
- 1333 MHz CL9 speed accelerates everyday tasks
- 204-pin SODIMM fits microserver and workstation slots
- Single-rank 1Rx8 layout eases dual-channel population
Microservers and NAS upgrade
This 4 GB DDR3L ECC SODIMM adds error-correcting memory to compatible microservers, mobile workstations and NAS appliances. It runs at 1333 MHz with CL9 latency and operates at 1.35 V or 1.5 V. The single-rank 1Rx8 module fits 204-pin slots and is unbuffered for broad platform support.
Replacing non-ECC or lower-capacity modules
The jump is worthwhile when your workload demands data integrity and the system board accepts DDR3L ECC unbuffered SODIMMs. Verify the manual for maximum capacity per slot and supported ranks before ordering. Systems limited to non-ECC memory cannot use this module.
Builders needing ECC on DDR3L platforms
Suits administrators upgrading supported microservers, NAS units or mobile workstations that require ECC unbuffered memory. Not for laptops or desktops lacking ECC support, nor for systems that only accept registered or load-reduced DIMMs. Buyers needing higher density per slot should look elsewhere.
商品特色
- ECC protection guards data integrity in critical workloads
- 35V DDR3L cuts power draw versus standard DDR3
- 1333 MHz CL9 speed accelerates everyday tasks
- 204-pin SODIMM fits microserver and workstation slots
- Single-rank 1Rx8 layout eases dual-channel population
商品規格
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 ECC SODIMM |
| Model | A-Tech 4GB 1Rx8 PC3L-10600 ECC SODIMM |
| Part Number | NE-SS-0557 |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
A-Tech 4GB DDR3 1600 ECC SODIMM CL11 1.5V 204-Pin 1Rx8
- 4GB
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB (2x4GB) DDR3L 1600 ECC SODIMM CL11 1.35V 204-Pin Kit
- 8GB (2 x 4GB)
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB DDR3 1333 ECC SODIMM 204-Pin 1.5V 2Rx8
- 8GB
- 204-Pin DDR3 SO-DIMM
A-Tech 8GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V 2Rx8 laptop RAM
- 8GB
- 204-Pin DDR3 SO-DIMM
商品問答
Does the 204-pin SO-DIMM fit a standard DDR3 laptop slot?
Yes, the 204-pin DDR3 SO-DIMM form factor matches the standard DDR3 laptop memory slot.
What is the correct way to seat the module so the ECC function works?
Align the notch with the slot key, press firmly until both side clips click, and verify the system BIOS recognises ECC mode.
Will the 1.35 V DDR3L chips need replacement if the laptop only supplies 1.5 V?
No, the module is rated for 1.35 V or 1.5 V operation, so it runs reliably at either voltage without degradation.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。








