BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
A 4 GB DDR3L SODIMM running at 1866 MHz with CL13 latency and 1.35 V low-voltage operation
This A-Tech module provides 4 GB of DDR3L memory at 1866 MHz with CL13 latency. It uses the 204-pin SO-DIMM form factor and operates at 1.35 V low voltage. The stick is unbuffered, non-ECC, and built as a compatible equivalent for Samsung M471B5173EB0-YMA. It is designed for notebook and all-in-one upgrades.
Buyers with systems that accept DDR3L SO-DIMMs at 1866 MHz and 1.35 V can use this module. It is not for laptops limited to 1.5 V standard DDR3, nor for machines that require registered or ECC memory. Builders needing more than a single 4 GB stick should look elsewhere.
The single specification that determines compatibility is the 1.35 V operating voltage. A system must explicitly support DDR3L low-voltage modules at this level; standard 1.5 V DDR3 slots may not run it correctly. Always verify the laptop's supported memory voltage before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
This module uses the standard 204-pin DDR3 SO-DIMM form factor; it fits any laptop slot designed for DDR3 or DDR3L memory.
Align the notch on the gold edge connector with the key in the slot, insert evenly until the contacts are fully hidden, then press down until the retention clips snap shut.
DDR3L memory has no moving parts and typically lasts the usable life of the laptop; replace only if a memory test reports errors or you need more capacity.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?