BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR3L laptop SODIMM at 1866MHz CL13, 1.35V low voltage for AMD and Intel notebooks
This 4GB DDR3L module runs at 1866MHz with CL13 latency and 1.35V operation. It uses the 204-pin SO-DIMM form factor and is unbuffered non-ECC memory. The stick is designed as a direct replacement for compatible laptop and all-in-one systems.
This module matches the Hynix HMT451S6AFR8A-RD, HMT451S6BFR8A-RD and HMT451S6DFR8A-RD part numbers for straightforward upgrades. Builders needing ECC error correction or registered buffering should look elsewhere because this stick is non-ECC and unbuffered. Systems requiring a different pin count or voltage will not accept this memory.
The 1.35V DDR3L rating is the single specification that determines whether this module works in a given machine. Standard 1.5V DDR3 slots may not support the lower voltage and DDR3L-only systems cannot use standard DDR3 modules. Verify the laptop's memory voltage requirement before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for DDR3L 1866 (PC3L-14900) operation at 1.35 V; sustained use at that speed depends on the laptop's memory controller and thermal design.
At 1.35 V the DDR3L module runs cooler than standard 1.5 V DDR3, producing modest heat that typical laptop cooling handles without extra airflow.
Yes — the module is a 204-pin DDR3L SODIMM requiring a compatible DDR3L slot and 1.35 V operation; verify your system specs before installing.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?