A-Tech
A-Tech 4GB DDR4 3200MHz 1Rx16 desktop RAM
A 4GB DDR4 3200MHz desktop module running at 1.20V for faster load times and smoother multitasking
- Capacity4GB
- SpeedDDR4 3200 (PC4 25600)
- Tested Frequency3200
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- Boosts multitasking with 4GB DDR4 3200MHz capacity
- Runs at standard 1.20V DDR4 voltage for efficiency
- Fits standard desktop slots with 288-pin DIMM form factor
- Non-ECC unbuffered design suits mainstream desktop systems
- Tested at 3200MHz frequency for reliable performance
4GB DDR4 3200MHz desktop module
This single 4GB DDR4 DIMM operates at 3200MHz with a tested frequency of 3200 and standard 1.20V voltage. The unbuffered non-ECC design uses a 1Rx16 organisation on a 288-pin form factor. It serves as a direct replacement for Micron MTA4ATF51264AZ-3G2 series modules in desktop systems.
Suits basic desktop upgrades.
This module fits AMD and Intel compatible desktops requiring a straightforward memory replacement or modest capacity increase. Builders needing more than 4GB per slot, ECC error correction, registered buffering, or speeds beyond 3200MHz should consider other configurations that match those specific requirements.
3200MHz DDR4 speed rating
The PC4-25600 designation confirms a 3200MHz data rate at 1.20V, which determines whether this module matches your motherboard's supported memory specification. Verify your system documentation for DDR4 3200 compatibility before installation to ensure correct operation.
商品特色
- Boosts multitasking with 4GB DDR4 3200MHz capacity
- Runs at standard 1.20V DDR4 voltage for efficiency
- Fits standard desktop slots with 288-pin DIMM form factor
- Non-ECC unbuffered design suits mainstream desktop systems
- Tested at 3200MHz frequency for reliable performance
商品規格
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
商品問答
Will this 4 GB module work alongside the 8 GB stick already in my desktop?
Yes, if your board supports DDR4 3200 unbuffered non-ECC DIMMs the 4 GB stick will run at the lowest common speed and voltage.
Does the 288-pin DIMM fit a standard ATX motherboard slot?
The module uses the 288-pin DDR4 DIMM form factor, which matches every current desktop DDR4 socket.
My system lists PC4-25600 — is this the same rating?
PC4-25600 is the peak transfer rate for DDR4 3200, so this module matches that specification exactly.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



