BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
8 GB DDR3 SODIMM laptop memory running at 1600 MHz with CL11 timing and 1.5 V operation
This A-Tech module provides eight gigabytes of DDR3 memory in a 204-pin SO-DIMM form factor. It runs at 1600MHz with CL11 latency at the standard 1.5V voltage. The stick is unbuffered, non-ECC and built with major-brand chips for AMD and Intel platforms.
The module matches HP part numbers such as 656291-150, 667217-361, 667217-961, 670034-005, 689374-001, 691160-965, B4U40AA, H2P65AA, H2P65AT, H2P65UT and H6Y77AA. Systems that require ECC or registered memory cannot use this unbuffered non-ECC stick.
This unit uses a 2Rx8 configuration, meaning it is a dual-rank module. Some laptops only accept single-rank SO-DIMMs, so verify the motherboard documentation before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the laptop, remove the battery if accessible, open the memory compartment, align the module notch with the slot key, insert at an angle, and press down until the retaining clips snap into place
No routine maintenance is required; keep the contacts clean and ensure the laptop cooling system stays clear of dust to avoid thermal throttling of the memory
The DDR3 1600 speed and CL11 latency set the bandwidth ceiling, so prolonged heavy multitasking will hit throughput limits before voltage or temperature becomes an issue
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?